onsemi 600 V 8 A Diode Switching 2-Pin TO-220FP MURF860G
- N° de stock RS:
- 184-1040
- Référence fabricant:
- MURF860G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 184-1040
- Référence fabricant:
- MURF860G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Mount Type | Through Hole | |
| Product Type | Diode | |
| Package Type | TO-220FP | |
| Maximum Continuous Forward Current If | 8A | |
| Peak Reverse Repetitive Voltage Vrrm | 600V | |
| Diode Configuration | Single | |
| Rectifier Type | Switching | |
| Pin Count | 2 | |
| Peak Reverse Current Ir | 500μA | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 100A | |
| Minimum Operating Temperature | -65°C | |
| Peak Reverse Recovery Time trr | 60ns | |
| Maximum Operating Temperature | 175°C | |
| Width | 4.7mm | |
| Height | 15.88mm | |
| Length | 10.67mm | |
| Automotive Standard | AEC-Q101 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Mount Type Through Hole | ||
Product Type Diode | ||
Package Type TO-220FP | ||
Maximum Continuous Forward Current If 8A | ||
Peak Reverse Repetitive Voltage Vrrm 600V | ||
Diode Configuration Single | ||
Rectifier Type Switching | ||
Pin Count 2 | ||
Peak Reverse Current Ir 500μA | ||
Peak Non-Repetitive Forward Surge Current Ifsm 100A | ||
Minimum Operating Temperature -65°C | ||
Peak Reverse Recovery Time trr 60ns | ||
Maximum Operating Temperature 175°C | ||
Width 4.7mm | ||
Height 15.88mm | ||
Length 10.67mm | ||
Automotive Standard AEC-Q101 | ||
- Pays d'origine :
- KR
The Ultrafast Rectifier is designed for use in switching power supplies, inverters and as free wheeling diodes.
Ultrafast 25, 50 and 75 Nanosecond Recovery Time
175 C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
Reverse Voltage to 600 Volts
Mechanical Characteristics:
Case: Epoxy, Molded
Weight: 1.9 grams (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
Lead Temperature for Soldering Purposes: 260 C Max. for 10 Seconds
Liens connexes
- onsemi 60 V 30 A Diode Switching 3-Pin TO-220FP
- onsemi 45 V 25 A Diode Switching 3-Pin TO-220FP
- onsemi 60 V 20 A Diode Switching 3-Pin TO-220FP
- onsemi 45 V 25 A Diode Switching 3-Pin TO-220FP MBRF2545CTG
- onsemi 60 V 20 A Diode Switching 3-Pin TO-220FP MBRF20L60CTG
- onsemi 200 V 20 A Diode Switching 3-Pin TO-220FP MBRF20200CTG
- onsemi 60 V 30 A Diode Switching 3-Pin TO-220FP MBRF30L60CTG
- onsemi 600 V 15 A Diode Fast Recovery 2-Pin TO-220FP MURF1560G