ABB GATE-D2 Series Safety Module, 5 Inputs, 5 Outputs, 24V dc, NO/2 NC
- N° de stock RS:
- 733-4849
- Référence fabricant:
- 2TLA020071R8200
- Fabricant:
- ABB
Sous-total (1 unité)*
465,31 €
(TVA exclue)
563,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 13 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 465,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 733-4849
- Référence fabricant:
- 2TLA020071R8200
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Safety Module | |
| Series | GATE-D2 | |
| Mount Type | DIN Rail | |
| Sub Type | Gateway | |
| For Use With | DeviceNet | |
| Supply Voltage | 24V dc | |
| Normal State Configuration | NO/2 NC | |
| Number of Inputs | 5 | |
| Number of Outputs | 5 | |
| Terminal Type | Spring Clamp | |
| Power Rating | 3kW | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Safety Module | ||
Series GATE-D2 | ||
Mount Type DIN Rail | ||
Sub Type Gateway | ||
For Use With DeviceNet | ||
Supply Voltage 24V dc | ||
Normal State Configuration NO/2 NC | ||
Number of Inputs 5 | ||
Number of Outputs 5 | ||
Terminal Type Spring Clamp | ||
Power Rating 3kW | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Pluto Gateways For Network Connection
The gateways are devices for transfer of data in both directions between the Pluto bus and other fieldbuses. They are made in these versions; GATE-D1 for DeviceNet (733-4849), GATE-E1 for Ethernet using Modbus A second usage for GATE-D1 and GATE-C1 is as a CAN-bridge (repeater) which transfers CAN telegrams between two CAN-buses. This can be useful when long cables are needed. With CANbridge the usage is not limited to any special protocol such as the Pluto CAN bus system, but it can be used for most CAN bus systems.
All gateways from ABB are mounted on a 35 mm DIN rail
24 Vdc operating voltage
The CAN bus and PROFIBUS are galvanic isolated from each other and from the 24 Vdc supply
The bus connectors have terminals for connection of a cable shield
Liens connexes
- Pilz PNOZsigma Series Output Module 24V dc, 4 NO/1 NC
- Dold LG 5929 Series Output Module 5 Outputs 5 NO/NC
- Schneider Electric XPSMCM Series Safety Module 1 NO/1 NC
- Schneider Electric XAP Series Safety Module 1 NO/1 NC
- Allen Bradley Guardmaster 440-R Series Output Module 24V dc, 4 NO/1 NC
- Schneider Electric XPSMCM Series Profibus Communication Module 1 NO/1 NC
- Pilz PNOZsigma Series Output Module 24V dc, 3 NO/1 NC
- Omron G9SA Series Output Module 24V dc, 3 NO/1 NC