Références fabricant

SICK I15 Safety Switch, Power, Fibreglass Reinforced Thermoplastic

N° de stock RS:: 285-1832
Référence fabricant:: i15-EP0123 Lock
Fabricant:: SICK

Sous-total (1 unité)*

255,99 €

(TVA exclue)

309,75 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s)
Plus 1 unité(s) expédiée(s) à partir du 18 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	255,99 €

*Prix donné à titre indicatif

N° de stock RS:: 285-1832
Référence fabricant:: i15-EP0123 Lock
Fabricant:: SICK

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SICK
	Product Type	Safety Switch
	Lock Style	Power
	Actuator Included	No
	Safety Contacts	2 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	I15
	Contact DC Voltage	24V dc
	Minimum Operating Temperature	-20°C
	Switch Contact Current	4A
	Contact AC Voltage	230V ac
	IP Rating	IP67
	Hazardous Area Certification	No
	Maximum Operating Temperature	55°C
	Depth	37.5mm
	Width	42mm
	Standards/Approvals	CE
	Length	96mm
	Number of Head Directions	4

	Sélectionner tout
	Marque SICK
	Product Type Safety Switch
	Lock Style Power
	Actuator Included No
	Safety Contacts 2 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Series I15
	Contact DC Voltage 24V dc
	Minimum Operating Temperature -20°C
	Switch Contact Current 4A
	Contact AC Voltage 230V ac
	IP Rating IP67
	Hazardous Area Certification No
	Maximum Operating Temperature 55°C
	Depth 37.5mm
	Width 42mm
	Standards/Approvals CE
	Length 96mm
	Number of Head Directions 4

Pays d'origine :: DE

SICK I15 Series Safety Switch, IP67, Fibreglass Reinforced Thermoplastic Housing - i15-EP0123 Lock

This safety switch is a lockable power interlock designed for safeguarding access to machinery in non-hazardous areas. It uses an electro-mechanical sensor and a power-to-lock solenoid to secure guards while providing contact outputs for safety monitoring. The unit is specified for use across typical industrial ambient temperatures and sealed against ingress to support installation where dust and water resistance are required.

Features and Benefits:

• 4A switching current for 230V AC and 24V DC operation
• 2NC positive-action safety contacts for secure monitoring
• Power-to-lock solenoid providing up to 1000N locking force
• Four-direction actuator approach for flexible installation
• IP67 enclosure rating for protection against dust and water

Applications

• Used for machine-guard interlocks on production lines
• Suitable for safety doors requiring monitored locking
• Ideal for retrofit of guarded access in factories
• Can be used with safety logic units for diagnostics
• Used with cable gland entries where a sealed connection is needed

What supply voltage does the locking solenoid accept?

The solenoid requires a DC supply between 20.4V DC and 26.4V DC.

How is the device connected electrically?

It uses electro-mechanical contacts with cable gland entry via one M20 gland and accepts 0.34mm² to 1.5mm² conductors.

What diagnostic or fault behaviour should be expected?

The switch has no internal fault detection and relies on the connected safety logic unit for fault monitoring.

What mechanical life can be expected under small-load switching?

The device achieves around 2 x 10⁶ switching cycles mechanical life and a B10d of 2 x 10⁶ switching cycles with small loads.

What environmental temperatures can the unit tolerate in storage and operation?

It is rated to operate and be stored between -20°C and +55°C.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.