SICK I12 Safety Switch, Fibreglass Reinforced Thermoplastic
- N° de stock RS:
- 285-1828
- Référence fabricant:
- i12-SA205
- Fabricant:
- SICK
Sous-total (1 unité)*
66,41 €
(TVA exclue)
80,36 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 09 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 66,41 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-1828
- Référence fabricant:
- i12-SA205
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Product Type | Safety Switch | |
| Actuator Included | No | |
| Safety Contacts | 2 NC | |
| Housing Material | Fibreglass Reinforced Thermoplastic | |
| Series | I12 | |
| Switch Contact Current | 2A | |
| Contact AC Voltage | 230V ac | |
| Minimum Operating Temperature | -20°C | |
| IP Rating | IP67 | |
| Contact DC Voltage | 24V dc | |
| Hazardous Area Certification | No | |
| Maximum Operating Temperature | 80°C | |
| Depth | 29mm | |
| Width | 36mm | |
| Number of Head Directions | 5 | |
| Length | 90.5mm | |
| Standards/Approvals | IEC 60529 | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Product Type Safety Switch | ||
Actuator Included No | ||
Safety Contacts 2 NC | ||
Housing Material Fibreglass Reinforced Thermoplastic | ||
Series I12 | ||
Switch Contact Current 2A | ||
Contact AC Voltage 230V ac | ||
Minimum Operating Temperature -20°C | ||
IP Rating IP67 | ||
Contact DC Voltage 24V dc | ||
Hazardous Area Certification No | ||
Maximum Operating Temperature 80°C | ||
Depth 29mm | ||
Width 36mm | ||
Number of Head Directions 5 | ||
Length 90.5mm | ||
Standards/Approvals IEC 60529 | ||
- Pays d'origine :
- DO
Overview
Safety switches with a separate actuator are made up of two parts: a safety switch that is mounted on the fixed part and an actuator that is mounted on the mobile part of the guard. When the guard is closed, the actuator is moved into the safety switch. This achieves the safe status and the safety-relevant contacts are closed.
These devices are ideal for protecting sliding and rotating doors, as well as removable protective covers. The i12S safety switch with a separate actuator is characterized by its miniature design, which makes direct mounting on the framework quick and easy.
At a glance
Narrow plastic housing
Rigid and mobile actuators
Available with M16 X 1.5 cable entry gland or Flexi Loop-compatible M12 plug connector (depending on variant)
Slow-action switching element with up to three contacts
IP 67 enclosure rating
Your Benefit
cost effective solution for all standard safety applications
Small design simplifies installation and makes it easy to mount directly on the guard door frame
High reliability and safety due to the cone shaped metal alignment aid
Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort
Applications
Liens connexes
- SICK I12 Safety Switch, Fibreglass Reinforced Thermoplastic
- SICK I12 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic
- SICK T4000 Safety Switch, Fibreglass Reinforced Thermoplastic
- SICK i11 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic
- SICK I17S Safety Interlock Switch, Fibreglass Reinforced Thermoplastic
- SICK i10 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic
- SICK i110 Safety Switch Fibreglass Reinforced Thermoplastic
- SICK TR110 Safety Switch Fibreglass Reinforced Thermoplastic