SICK i110 Safety Switch, Power, Fibreglass Reinforced Thermoplastic, Power to Release

N° de stock RS:: 285-1823
Référence fabricant:: i110-M0233
Fabricant:: SICK

Sous-total (1 unité)*

285,99 €

(TVA exclue)

346,05 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 04 janvier 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	285,99 €

*Prix donné à titre indicatif

N° de stock RS:: 285-1823
Référence fabricant:: i110-M0233
Fabricant:: SICK

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SICK
	Product Type	Safety Switch
	Lock Style	Power
	Lock Type	Power to Release
	Actuator Included	No
	Safety Contacts	2 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	i110
	Contact DC Voltage	24V dc
	Contact AC Voltage	230V ac
	IP Rating	IP67
	Switch Contact Current	4A
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	55°C
	Hazardous Area Certification	No
	Length	190mm
	Standards/Approvals	IEC 60529
	Width	42mm
	Depth	40mm
	Number of Head Directions	5

	Sélectionner tout
	Marque SICK
	Product Type Safety Switch
	Lock Style Power
	Lock Type Power to Release
	Actuator Included No
	Safety Contacts 2 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Series i110
	Contact DC Voltage 24V dc
	Contact AC Voltage 230V ac
	IP Rating IP67
	Switch Contact Current 4A
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 55°C
	Hazardous Area Certification No
	Length 190mm
	Standards/Approvals IEC 60529
	Width 42mm
	Depth 40mm
	Number of Head Directions 5

Pays d'origine :: DE

SICK i110 Series Safety Switch, 190mm Length, IP67 - i110-M0233

This safety switch is an electro‑mechanical interlock designed to secure movable guards in industrial settings. It employs a power‑to‑release locking principle with positive‑action monitoring contacts to supervise lock and door states. The unit is housed in glass‑fibre reinforced thermoplastic for protection against contaminants and is intended for individual wiring with diagnostic‑capable logic units. The device operates across a wide ambient range and is rated for use where ingress protection to IP67 is required.

Features and Benefits:

• 2NC safety contacts provide monitored locking at 4A current
• Power‑to‑release lock ensures controlled retention during power application
• Five head directions allow flexible actuator approach
• Contamination rating 3 supports operation in dirty environments
• Rated insulation voltage 250V provides electrical separation for controls

Applications

• Suitable for guarding on automated production machinery
• Ideal for safety interlocks on access doors in conveyors
• Used with diagnostic safety logic for monitored installations
• Can be used for machine perimeter protection in factories
• Used for retrofit safety upgrades requiring IP67 protection

What electrical ratings should be considered for wiring?

The contacts are rated 4A at 230V AC and 4A at 24V DC with Ui 250V and Uimp 1,500V.

How is the device connected electrically?

Connections are MADE via three M20 cable glands accepting 0.34mm² to 1.5mm² conductors and short‑circuit protection of 4A gG is recommended.

What mechanical durability can be expected under normal use?

Mechanical life is specified as 1x10⁶ switching cycles with an actuation frequency up to 1,200/h.

How does the unit behave in fault conditions?

The switch contains no internal fault detection

any fault monitoring must be performed by the external safety‑related logic unit.