Schmersal AZ201 Limit Switch, Fibreglass Reinforced Thermoplastic, Handle

This limit switch is a Compact safety device designed to detect and control mechanical movement in industrial environments. It provides secure switching for low-voltage control circuits and is intended for installations where ingress protection and a sturdy enclosure are required. The unit is not certified for hazardous areas and is supplied without an actuator.

• IP67-rated enclosure protects against dust and immersion
• Fibreglass-reinforced thermoplastic housing offers chemical resistance
• Two safety contacts deliver straightforward contact switching capability
• Handle lock mechanism permits secure manual locking of the switch
• 24V AC switching at 1200mA supports low-voltage control circuits
• Operates between -25 to 60°C for varied ambient conditions

• Suitable for conveyor end-of-travel detection in washdown zones
• Ideal for machine panels requiring dust and water protection
• Used with low-voltage control systems in manufacturing lines
• Can be used for access interlock where handle locking is needed
• Suitable for outdoor enclosures within non-hazardous premises

No, the device is supplied without an actuator and requires a compatible actuator to be fitted on site.

The switch is built in accordance with ISO and IEC standards referenced for performance and testing.

The contact ratings permit switching at 24V AC with a maximum current of 1200mA.

It is not certified for hazardous area installation and should only be used in non-hazardous environments.

The enclosure is formed from fibreglass-reinforced thermoplastic and the overall construction achieves an IP67 ingress rating.