Omron D4SL Series Operation Key
- N° de stock RS:
- 214-6739
- Référence fabricant:
- D4SL-NK2G
- Fabricant:
- Omron
Sous-total (1 unité)*
18,73 €
(TVA exclue)
22,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 26 unité(s) expédiée(s) à partir du 07 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 18,73 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 214-6739
- Référence fabricant:
- D4SL-NK2G
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Accessory Type | Operation Key | |
| Product Type | Safety Interlock Component | |
| Series | D4SL | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Accessory Type Operation Key | ||
Product Type Safety Interlock Component | ||
Series D4SL | ||
Omron D4SL Series Safety Interlock Component, Operation Key Accessory - D4SL-NK2G
This safety interlock component provides a keyed operation Interface for guard-lock safety-door switches in industrial automation environments. Designed as a replaceable operation key accessory, it enables controlled insertion and removal of the key to permit or prevent access to hazardous areas. It is intended for use with compatible guard-lock safety-door switch assemblies and suited to lightweight door applications and aluminium framing.
Features & Benefits
• 1300N holding force provides secure key retention
• 24V DC solenoid drive allows direct controller activation
• IP67 protection supports dust and water resistance
• Mechanical durability 20,000 operations reduces replacement frequency
• LED indicator consumes approx 10mA for Visual lock status
• Pre-travel 15mm and lock movement greater than or equal to 3mm ensuring correct actuation
• 24V DC solenoid drive allows direct controller activation
• IP67 protection supports dust and water resistance
• Mechanical durability 20,000 operations reduces replacement frequency
• LED indicator consumes approx 10mA for Visual lock status
• Pre-travel 15mm and lock movement greater than or equal to 3mm ensuring correct actuation
Applications
• Suitable for safeguarding access panels on production lines
• Ideal for integration with conveyor guarding interlocks
• Used with lightweight doors on 40 x 40 mm aluminium frames
• Can be used for lockout procedures to prevent entrapment
• Suitable for safety circuits requiring direct-opening contacts
• Ideal for integration with conveyor guarding interlocks
• Used with lightweight doors on 40 x 40 mm aluminium frames
• Can be used for lockout procedures to prevent entrapment
• Suitable for safety circuits requiring direct-opening contacts
What electrical supply is required for the solenoid?
The solenoid operates at 24V DC with an initial inrush period followed by a constant current mode
plan power supply capacity accordingly.
How is the key protected against accidental removal?
The accessory supports a lockout key function and a slide handle mechanism that prevents door closure unless the lockout key is correctly inserted and turned.
What environmental limits apply to installation?
It is rated for −10 to 55°C ambient and up to 95% humidity
avoid locations with continuous oil or water splashes and corrosive gases.
How should the accessory be mounted?
Use the specified mounting screws and washers, secure at multiple points, and maintain the ±0.5mm SHOT bolt-to-guide gap for correct operation.