ABB JSHD Series Safety Enabling Switch, 3 Position, IP65
- N° de stock RS:
- 253-2049
- Référence fabricant:
- 2TLA020002R0200
- Fabricant:
- ABB
Sous-total (1 unité)*
370,87 €
(TVA exclue)
448,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 28 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 370,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 253-2049
- Référence fabricant:
- 2TLA020002R0200
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Series | JSHD | |
| Product Type | Safety Enabling Switch | |
| Number of Positions | 3 | |
| IP Rating | IP65 | |
| Terminal Type | 6 Lead | |
| Housing Material | Steering T: Polypropylene with Fibreglass Filling, Rubber Thermoplastic Elastomer On Polypropylene Basis, Polypropylene with Mineral Filling | |
| Minimum Operating Temperature | -20°C | |
| Switch Contact Current | 20mA | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS | |
| Hazardous Area Certification | No | |
| Depth | 56mm | |
| Width | 52mm | |
| Length | 150mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Series JSHD | ||
Product Type Safety Enabling Switch | ||
Number of Positions 3 | ||
IP Rating IP65 | ||
Terminal Type 6 Lead | ||
Housing Material Steering T: Polypropylene with Fibreglass Filling, Rubber Thermoplastic Elastomer On Polypropylene Basis, Polypropylene with Mineral Filling | ||
Minimum Operating Temperature -20°C | ||
Switch Contact Current 20mA | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS | ||
Hazardous Area Certification No | ||
Depth 56mm | ||
Width 52mm | ||
Length 150mm | ||
Statut RoHS non applicable
- Pays d'origine :
- SE
The ABB JSHD4H2A is a three-position dual pushbutton usually mounted on another device, e.g. a robot pendant. The housing is PP (polypropylene with mineral filling); rubber is a thermoplastic elastomer on PP basis and steering T is PP with fiberglass filling.
Three-position device for external panel mounting 6x150mm leads
Protection of IP65
Liens connexes
- ABB JSHD Series Safety Enabling Switch IP65
- ABB JSHD Series Safety Enabling Switch 2 CO, IP65
- ABB JSHD Series Safety Enabling Switch IP54
- ABB 2TLA02 Series Safety Enabling Switch 2 CO, IP65
- ABB JSHD4-2 Series Safety Enabling Switch 2 CO, IP65
- ABB 2TLA02 Series Safety Enabling Switch 1 NO/1 CO, IP65
- Idec HE5B Series Safety Enabling Switch IP65
- Idec HE6B Series Safety Enabling Switch DP3T, IP65