Phoenix Contact IFS-CONFSTICK Series Safety Controller, 24V
- N° de stock RS:
- 666-7101
- Référence fabricant:
- 2986122
- Fabricant:
- Phoenix Contact
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 666-7101
- Référence fabricant:
- 2986122
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Safety Controller | |
| Series | IFS-CONFSTICK | |
| Supply Voltage | 24V | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Safety Controller | ||
Series IFS-CONFSTICK | ||
Supply Voltage 24V | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
PSR-TRISAFE-S Safety Controller
The PSR-TRISAFE-S is a standalone safety controller with 20 safe inputs, four safe outputs and two safe ground-switching outputs. If additional safe outputs or safe relay outputs are needed, standard safety relay expansion modules can be hard-wired to the safe outputs of the PSR-TRISAFE-S module. System designers should consider adding a safety expansion relay for one of two reasons: (a) the PSR-TRISAFE-S module does not have enough safe outputs; (b) a safe relay circuit is needed to switch a voltage other than 24 Vdc. The PSR-TRISAFE-S module is a 24 V solid-state device.
Intuitive three step software
Manipulation proof: Password protect against unathorised changes in the safety logic of the hardware and software: Protect against unwanted changes in the safety logic with the front of device "CONFIRM" button
All commonly used safety functions can be implemented easily and flexibly: E-stop and guard door monitoring, non-contact switches, safety sensors, laser scanners, optical devices (with or without muting) as well as safe mode selection, enabling switches, two hand control devices
2 clock outputs, 4 alarm outputs and ground switching output to increase safety of monitoring circuit
Approvals
TUV FS, UL, cUL
Standards
EN954-1 to Category 4, ISO 13849-1 to PLe, IEC 62061 to SILCL 3 for machine and system engineering
SIL3 to IEC 61508 for the Process Industry
SIL3 to IEC 61508 for the Process Industry
Liens connexes
- Phoenix Contact PLCnext Control Series Safety Controller, 24V dc
- Phoenix Contact IB IL Series Safety Controller 24V
- Phoenix Contact IB IL 24 PSDI 16-PAC Series Safety Controller 24V
- Phoenix Contact EM-MODBUS-GATEWAY-IFS Starter IP20
- Phoenix Contact Safety Controller Cable
- Phoenix Contact IB IL Series Safety Module 24V dc
- Phoenix Contact 2701 Series Safety Controller 7.5V
- Phoenix Contact EM-CAN-GATEWAY-IFS Ethernet Module 3 Phase, IP20
