Pilz PNOZmulti Series Safety Controller, 20 Safety Inputs, 6 Safety Outputs, 24V dc
- N° de stock RS:
- 619-2672
- Référence fabricant:
- KIT773100
- Fabricant:
- Pilz
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
636,89 €
(TVA exclue)
770,64 €
(TVA incluse)
- N° de stock RS:
- 619-2672
- Référence fabricant:
- KIT773100
- Fabricant:
- Pilz
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Pilz | |
| Series | PNOZmulti | |
| Product Type | Safety Controller | |
| Number of Safety Inputs | 20 | |
| Number of Safety Outputs | 6 | |
| Mount Type | DIN Rail | |
| Safety Category | 4 | |
| Supply Voltage | 24V dc | |
| Number of I/Os | 26 | |
| Contact Current | 6A | |
| Contact Voltage | 240V ac | |
| Standards/Approvals | CE, cULus | |
| Width | 135mm | |
| Length | 94mm | |
| Depth | 121mm | |
| IP Rating | IP20 | |
| Sélectionner tout | ||
|---|---|---|
Marque Pilz | ||
Series PNOZmulti | ||
Product Type Safety Controller | ||
Number of Safety Inputs 20 | ||
Number of Safety Outputs 6 | ||
Mount Type DIN Rail | ||
Safety Category 4 | ||
Supply Voltage 24V dc | ||
Number of I/Os 26 | ||
Contact Current 6A | ||
Contact Voltage 240V ac | ||
Standards/Approvals CE, cULus | ||
Width 135mm | ||
Length 94mm | ||
Depth 121mm | ||
IP Rating IP20 | ||
Pilz Safety Controller
The Pilz PNOZmulti series is a 20 safety inputs and 6 safety outputs safety controller. This is an innovative device with positive guided relay outputs and semiconductor outputs. The safety function remains effective in the case of a component failure. The relay contacts meet the requirements for safe separation through increased insulation. The safety outputs are tested periodically using a disconnection test.
Note
Configuration software and pre: license sold separately
Call Pilz to register, this activates the software and is used for technical queries and support from Pilz
In order to program the controller from your PC, you will need an adaptor and cable
Inclusion:
Plug: in screw terminals and 32K SIM card
Features and Benefits
E-STOP pushbutton
Two: hand button
Safety gate limit switch
Reset button
Light barrier
Scanner
Enable switch
PSEN – operating mode selector switch – safety mat
LED indicator for diagnostics, supply voltage, output circuits, and input circuits
Circuit is redundant with built: in self: monitoring
Maximum 8 expansion modules and 1 fieldbus module can be connected
Monitors shorts between the safety outputs
Plug: in connection terminals (either cage clamp terminal or screw terminal)
Certifications
UL listed
CCC certified
BG certified
VDE 0113Part 1
EN 60204: 1
GOST R certified
TUV certified
NFPA 79: 2002
Approvals
UL, CCC, GOST R, TUV, NFPA 79:2002, UL508, OSHA
Liens connexes
- Pilz PNOZmulti Mini Series Safety Controller 4 Safety Outputs, 24V dc
- Pilz PNOZmulti Series Safety Controller 6 Safety Outputs, 24 V dc
- Pilz PNOZmulti Mini Series Safety Controller 4 Safety Outputs, 24 V dc
- Pilz Safety Controller 8 Safety Outputs, 24V
- Pilz Safety Controller 32 Safety Outputs, 24V
- Pilz Safety Controller 4 Safety Outputs, 24V
- Pilz Safety Controller 4 Safety Outputs, 24V dc
- Pilz Safety Controller 2 Safety Outputs, 24V dc