Ixxat CANblue II Wireless
- N° de stock RS:
- 226-2737
- Référence fabricant:
- 1.01.0126.12001
- Fabricant:
- Ixxat
Sous-total (1 unité)*
562,49 €
(TVA exclue)
680,61 €
(TVA incluse)
Ajouter 1 unité pour bénéficier d'une livraison gratuite
Dernier stock RS
- 1 dernière(s) unité(s), prête(s) à l'envoi
Unité | Prix par unité |
|---|---|
| 1 + | 562,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 226-2737
- Référence fabricant:
- 1.01.0126.12001
- Fabricant:
- Ixxat
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ixxat | |
| Product Type | Router | |
| Connection Type | Wireless | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Ixxat | ||
Product Type Router | ||
Connection Type Wireless | ||
Standards/Approvals No | ||
- Pays d'origine :
- DE
Ixxat CANblue II, active CAN-Bluetooth interface for use with external antenna
The Ixxat CANblue II is a versatile Bluetooth module designed for use in CAN systems. With its three operating modes as PC interface, bridge, or gateway, it is suited for a wide range of applications, including mobile configuration, real-time analysis, and connecting CAN networks via Bluetooth. It provides a wireless communication range of up to 200 meters with a typical latency of approx. 4 ms. Multiple CANblue II devices can be linked to bridge or extend CAN networks, enabling flexible network segmentation and communication across larger areas.
The device is equipped with a D-Sub 9 plug for the CAN bus connection and a RP-SMA connector to install an external antenna. It is powered by a 32-bit microcontroller, supporting a 1 Mbit baud rate at full bus load without data loss. The galvanic isolation provides reliable protection of the device against overvoltage and voltage peaks.
An external antenna for use with the CANblue II is available for separate purchase.
Features and Benefits
• Quick start-up and connection
• Flexible configuration options
• High data throughput combined with low latency
• High transmission performance without message loss
• For usage with external antenna
Technical Data
• Connectors: 1 x D-Sub 9, 1 x RP-SMA
• Bluetooth v4.0 with EDR
• CAN interface: CAN high-speed (ISO 11898-2)
• Transmission delay: approx. 4 ms (in shortest latency mode)
• Galvanic isolation: 1 kV DC for 1 sec.
• Certification: CE, FCC, Telec