IDEM GLM Rope Pull Switch 205 mm, Straight, 2 NO/2 NC
- N° de stock RS:
- 826-4091
- Référence fabricant:
- 143052
- Fabricant:
- IDEM
Sous-total (1 unité)*
120,94 €
(TVA exclue)
146,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 19 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 120,94 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 826-4091
- Référence fabricant:
- 143052
- Fabricant:
- IDEM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | IDEM | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| Indicator Type | Steady Red, Flashing Red, LED Steady Green, LED Green | |
| Mounting Orientation | Straight | |
| IP Rating | IP67 | |
| Number of Cable Entries | 4 | |
| Series | GLM | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Contact DC Voltage | 250V dc | |
| Contact AC Voltage | 250V ac | |
| E-Stop Button | Yes | |
| Maximum Operating Temperature | 80°C | |
| Width | 57mm | |
| Housing Material | Die Cast Aluminium | |
| Depth | 57mm | |
| Standards/Approvals | No | |
| Length | 205mm | |
| Hazardous Area Certification | NO | |
| Conduit Entry | M20 | |
| Mechanical Life | 1500000Operations | |
| Sélectionner tout | ||
|---|---|---|
Marque IDEM | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
Indicator Type Steady Red, Flashing Red, LED Steady Green, LED Green | ||
Mounting Orientation Straight | ||
IP Rating IP67 | ||
Number of Cable Entries 4 | ||
Series GLM | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Contact DC Voltage 250V dc | ||
Contact AC Voltage 250V ac | ||
E-Stop Button Yes | ||
Maximum Operating Temperature 80°C | ||
Width 57mm | ||
Housing Material Die Cast Aluminium | ||
Depth 57mm | ||
Standards/Approvals No | ||
Length 205mm | ||
Hazardous Area Certification NO | ||
Conduit Entry M20 | ||
Mechanical Life 1500000Operations | ||
- Pays d'origine :
- GB
IDEM Rope Pull Switch
The IDEM GLM series safety rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has die-cast housing that protects short conveyor lengths of up to 50m and offer a choice of fittings depending on the application. This switch is designed to be mounted on machines and sections of conveyors which cannot be protected by guards, and unlike emergency stop pushbuttons, it can be activated from any point along the length of the rope pull to provide robust emergency stop protection. In combination with a dual-channel safety monitoring relay, this safety rope switch can be used as an emergency stop device and monitored. This product has a guardian line which has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. This switch is mechanically latched and can only be returned to the operational condition by pressing the blue reset button. The switch has an electrical current rating of 2.5A at a voltage rating of 250VAC/VDC.
Features and Benefits
Switch mechanism will latch the instant the safety contacts open
Positive break contacts
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole either 3NC/1NO or 2NC/2NO
Size of cable entry is M20
Certifications
IEC60947-5-1
IEC60947-5-5
EN954-1
EN62061
UL508
approved
ISO 13850
ISO 13849-1
CE certified
TUV approved
IP67 rated