SICK I150 Rope Pull Switch 203 mm, 3 NC/1 NO
- N° de stock RS:
- 285-9587
- Référence fabricant:
- I150-RP313 / 6024883
- Fabricant:
- SICK
Sous-total (1 unité)*
206,72 €
(TVA exclue)
250,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 3 unité(s) expédiée(s) à partir du 25 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 206,72 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-9587
- Référence fabricant:
- I150-RP313 / 6024883
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 3 NC/1 NO | |
| IP Rating | IP65 | |
| Series | I150 | |
| Contact DC Voltage | 24V dc | |
| Contact AC Voltage | 240V ac | |
| Contact Current | 3A | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | China RoHS, cULus, EU DoC, IEC, UKCA | |
| Housing Material | Metal | |
| Length | 203mm | |
| Width | 85mm | |
| Depth | 69mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | M20 | |
| Mechanical Life | 106Cycles | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Product Type Rope Pull Switch | ||
Contact Configuration 3 NC/1 NO | ||
IP Rating IP65 | ||
Series I150 | ||
Contact DC Voltage 24V dc | ||
Contact AC Voltage 240V ac | ||
Contact Current 3A | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals China RoHS, cULus, EU DoC, IEC, UKCA | ||
Housing Material Metal | ||
Length 203mm | ||
Width 85mm | ||
Depth 69mm | ||
Hazardous Area Certification No | ||
Conduit Entry M20 | ||
Mechanical Life 106Cycles | ||
- Pays d'origine :
- DO
SICK I150 Series Rope Pull Switch, 203mm Length, Metal Housing - I150-RP313 / 6024883
This rope pull switch is a manually operated safety device designed to stop machinery by pulling a rope up to 75m long. It is intended for industrial safety applications where a linear actuator along a rope line provides a Rapid stop command. The enclosure is rated to IP65 for protection against dust and water ingress and is suitable for environments with ambient temperatures from -25°C to +80°C.
Features and Benefits:
• 3NC/1NO contacts provide distinct safety signalling capability
• 3A rated current supports 240V AC switching requirements
• Die-cast lightweight metal housing delivers robust mounting options
• Mechanical life 1x10^6 switching cycles enables prolonged service
• M20 cable gland permits standard conduit entry installation
• 3A rated current supports 240V AC switching requirements
• Die-cast lightweight metal housing delivers robust mounting options
• Mechanical life 1x10^6 switching cycles enables prolonged service
• M20 cable gland permits standard conduit entry installation
Applications
• Suitable for emergency stop lines on conveyor systems
• Ideal for long-span rope actuation up to 75m
• Used with safety logic units for monitored stop functions
• Can be used for perimeter guarding of production lines
• Suitable for retrofit where metal-housed stops are required
• Ideal for long-span rope actuation up to 75m
• Used with safety logic units for monitored stop functions
• Can be used for perimeter guarding of production lines
• Suitable for retrofit where metal-housed stops are required
How is fault detection handled for this device?
The switch lacks internal fault detection, so connected safety logic must detect faults.
What electrical ratings support control wiring choices?
It supports AC-15/DC-13 usage with 3A at 240V AC and 2A at 24V DC switching.
What environmental conditions can it withstand?
The unit operates and is stored between -25°C and +80°C and meets IP65 enclosure protection.
What wiring and conductor sizes are compatible?
Connection is via three M20 cable glands accepting conductors up to 1.5mm².
What switching principle and minimum switching thresholds apply?
It uses a slow-action switching element with switching voltage ≥5V DC and minimum switching current 5mA.
Liens connexes
- SICK I150 Rope Pull Switch 203 mm, 2 NC/2 NO
- SICK I150 Rope Pull Switch 203 mm, 2 NC
- Pilz 570301 Rope Pull Switch 50 m, 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Pilz 570 Rope Pull Switch 50 m, 2 NO/2 NC
- SICK IE110 Rope Pull Switch
- SICK IE110 Rope Pull Switch 100 m
- SICK IE110 Rope Pull Switch 30 m