Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- N° de stock RS:
- 130-0882
- Référence fabricant:
- XY2CE1A290
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
459,50 €
(TVA exclue)
556,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 3 unité(s) expédiée(s) à partir du 18 juin 2026
- Plus 3 unité(s) expédiée(s) à partir du 30 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 459,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 130-0882
- Référence fabricant:
- XY2CE1A290
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Contact AC Voltage | 240V ac | |
| E-Stop Button | Yes | |
| Reset Button | Yes | |
| Contact DC Voltage | 250V dc | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Housing Material | Stainless Steel | |
| Length | 229mm | |
| Width | 105mm | |
| Standards/Approvals | UL (NISD), CSA C 22-2, EAC, CSA, CCC, EN/IEC 60947-5-5, UL 508 | |
| Depth | 142mm | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | M20 | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Contact AC Voltage 240V ac | ||
E-Stop Button Yes | ||
Reset Button Yes | ||
Contact DC Voltage 250V dc | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Housing Material Stainless Steel | ||
Length 229mm | ||
Width 105mm | ||
Standards/Approvals UL (NISD), CSA C 22-2, EAC, CSA, CCC, EN/IEC 60947-5-5, UL 508 | ||
Depth 142mm | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry M20 | ||
- Pays d'origine :
- MA
Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
Note
The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.
Standards
EN/ISO 13850:2006
Liens connexes
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC
- Telemecanique Sensors Telemecanique Emergency Stop rope pull Switches XY2C Grab Wire Switch 2 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 2 NO/2 NC