SKF NK 24/20 24 mm ID Roller Bearing Needle, 32 mm OD
- N° de stock RS:
- 233-7197
- Référence fabricant:
- NK 24/20
- Fabricant:
- SKF
Sous-total (1 unité)*
28,69 €
(TVA exclue)
34,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 28,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-7197
- Référence fabricant:
- NK 24/20
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 24mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Roller Material | Carbon Chrome Steel | |
| Cage Material | Sheet Steel | |
| Series | NK | |
| Limiting Speed | 19000rpm | |
| Standards/Approvals | No | |
| Maximum Speed - Oil | 16000rpm | |
| Static Load Rating | 32.5kN | |
| Number of Rows | 1 | |
| Dynamic Load Rating | 19kN | |
| End Type | Open | |
| Bearing Material | Steel | |
| Maximum Speed - Grease | 10000rpm | |
| Outside Diameter | 32mm | |
| Race Type | Grooved | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 24mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Roller Material Carbon Chrome Steel | ||
Cage Material Sheet Steel | ||
Series NK | ||
Limiting Speed 19000rpm | ||
Standards/Approvals No | ||
Maximum Speed - Oil 16000rpm | ||
Static Load Rating 32.5kN | ||
Number of Rows 1 | ||
Dynamic Load Rating 19kN | ||
End Type Open | ||
Bearing Material Steel | ||
Maximum Speed - Grease 10000rpm | ||
Outside Diameter 32mm | ||
Race Type Grooved | ||
Bearing Type Needle | ||
- Pays d'origine :
- VN
SKF Series NK Roller Bearing, 20mm Race Width, 32mm Outside Diameter - NK 24/20
This roller bearing is a needle-type component designed to support radial loads in rotating assemblies where Compact cross-sections and high load capacity are required. It features an open-end configuration and a grooved race profile to accommodate rollers while operating at elevated rotational speeds in oil- or grease-lubricated systems.
Features and Benefits:
• Needle rollers manufactured from carbon chrome steel enhance wear resistance
• Sheet steel cage maintains roller spacing for steady load distribution
• Parallel bore allows straightforward shaft mounting and alignment
• Dynamic load capacity of 19 kN supports continuous radial forces
• Static load capacity of 32.5 kN resists heavy stationary loads
• Limiting rotational speed of 19,000 r/min permits high-speed operation
• Sheet steel cage maintains roller spacing for steady load distribution
• Parallel bore allows straightforward shaft mounting and alignment
• Dynamic load capacity of 19 kN supports continuous radial forces
• Static load capacity of 32.5 kN resists heavy stationary loads
• Limiting rotational speed of 19,000 r/min permits high-speed operation
Applications
• Suitable for Compact transmission shafts in industrial gearboxes
• Used with oscillating linkages requiring high radial capacity
• Ideal for high-speed spindles in light machining
• Can be used for pivot points in automated assembly equipment
• Used for drive rollers in conveyor modules with limited space
• Used with oscillating linkages requiring high radial capacity
• Ideal for high-speed spindles in light machining
• Can be used for pivot points in automated assembly equipment
• Used for drive rollers in conveyor modules with limited space
What lubrication regimes are permissible for operation?
It can operate with oil lubrication at speeds up to 16,000 r/min and with grease up to 10,000 r/min.
How many rows of rollers does it contain?
It is constructed as a single-row needle bearing to minimise radial thickness.
What materials are used for the rings and rollers?
The rollers are carbon chrome steel and the bearing races are formed from steel.
How does the race profile affect load handling?
The grooved race confines rollers laterally to maintain load distribution and rotational stability.
What external dimensions are relevant for shaft fitment?
The internal diameter is 24 mm and the outside diameter is 32 mm which determine shaft and housing interfaces.
Liens connexes
- SKF NK 24/16 24 mm ID Roller Bearing Needle, 32 mm OD
- SKF NK 32/30 32 mm ID Roller Bearing Needle, 42 mm OD
- SKF NK 16/16 16 mm ID Roller Bearing Needle, 24 mm OD
- SKF NK 15/20 15 mm ID Needle Roller Bearing Needle Roller, 23 mm OD
- SKF NK 17/16 17 mm ID Needle Roller Bearing Needle Roller, 25 mm OD
- SKF NK 14/20 14 mm ID Needle Roller Bearing Needle Roller, 22 mm OD
- SKF NK 85/25 Needle Roller Bearing Needle
- SKF NK 60/35 Needle Roller Bearing Needle