SKF C 2220 K/C3 Taper 100 mm ID Roller Bearing, 180 mm OD
- N° de stock RS:
- 208-0160
- Référence fabricant:
- C 2220 K/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
872,34 €
(TVA exclue)
1 055,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 15 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 872,34 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0160
- Référence fabricant:
- C 2220 K/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 100mm | |
| Bore Type | Parallel | |
| Cup Width | 46mm | |
| Static Load Rating | 465kN | |
| Limiting Speed | 4800rpm | |
| Number of Rows | 1 | |
| Cone Width | 46mm | |
| Outside Diameter | 180mm | |
| End Type | Sealed | |
| Bearing Dynamic Load Rating | 415kN | |
| Standards/Approvals | No | |
| Series | C 2220 K | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 100mm | ||
Bore Type Parallel | ||
Cup Width 46mm | ||
Static Load Rating 465kN | ||
Limiting Speed 4800rpm | ||
Number of Rows 1 | ||
Cone Width 46mm | ||
Outside Diameter 180mm | ||
End Type Sealed | ||
Bearing Dynamic Load Rating 415kN | ||
Standards/Approvals No | ||
Series C 2220 K | ||
Bearing Type Taper | ||
- Pays d'origine :
- SE
The SKF CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles. They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.
Accommodate misalignment
CARB bearings are self-aligning like spherical roller bearings or self-aligning ball bearings.
Accommodate axial displacement
CARB bearings compensate for thermal expansion of the shaft like cylindrical or needle roller bearings .
Wide assortment of dimension series
CARB bearings are available with the same boundary dimensions as corresponding spherical roller bearings, self-aligning ball bearings, cylindrical roller bearings and needle roller bearings.
Long service life
The special roller profile prevents stress peaks at the roller ends.
Low friction
Self-guiding rollers keep friction and frictional heat at low levels.
Improved wear resistance
All CARB bearings are upgraded SKF Explorer bearings.
Low noise
Liens connexes
- SKF NU 2220 ECML/C3 100 mm ID Roller Bearing, 180 mm OD
- SKF NU 2220 ECP/C3 100 mm ID Cylindrical Roller Bearing, 180 mm OD
- SKF C 2220/C3 Cylindrical 100 mm ID CARB Toroidal Roller Bearing, 180 mm OD
- SKF 2220 K/C3 100 mm ID 2 Row Ball Bearing -, 180 mm OD
- SKF C 2316 K/C3 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF C 2222 K/C3 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF C 2218 K/C3 Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF C 2217 K/C3 Taper 85 mm ID Roller Bearing, 150 mm OD