SKF 33210 Taper 50 mm ID Roller Bearing, 90 mm OD
- N° de stock RS:
- 208-0101
- Référence fabricant:
- 33210
- Fabricant:
- SKF
Sous-total (1 unité)*
77,86 €
(TVA exclue)
94,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 5 unité(s) expédiée(s) à partir du 07 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 77,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0101
- Référence fabricant:
- 33210
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Static Load Rating | 164kN | |
| Number of Rows | 1 | |
| Outside Diameter | 90mm | |
| Standards/Approvals | No | |
| Bearing Material | Steel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 118kN | |
| Limiting Speed | 7000rpm | |
| Cup Width | 24.5mm | |
| Cone Width | 32mm | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Static Load Rating 164kN | ||
Number of Rows 1 | ||
Outside Diameter 90mm | ||
Standards/Approvals No | ||
Bearing Material Steel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 118kN | ||
Limiting Speed 7000rpm | ||
Cup Width 24.5mm | ||
Cone Width 32mm | ||
Bearing Type Taper | ||
Race Type Tapered | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- RS PRO 33210 Taper 50 mm ID Roller Bearing, 90 mm OD
- Timken 33210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- NTN 4T-33210 Single Row Tapered Roller 50 mm ID Roller Bearing, 90 mm OD
- SKF 32210 Taper 50 mm ID Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Tapered Roller Bearing, 90 mm OD
- NSK 30210J Taper 50 mm ID Taper Roller Bearing, 90 mm OD
- SKF 30318 Taper 90 mm ID Roller Bearing, 190 mm OD