SKF 33016 Taper 80 mm ID Roller Bearing, 125 mm OD
- N° de stock RS:
- 208-0085
- Référence fabricant:
- 33016
- Fabricant:
- SKF
Sous-total (1 unité)*
166,40 €
(TVA exclue)
201,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 166,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0085
- Référence fabricant:
- 33016
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Outside Diameter | 125mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 182kN | |
| Standards/Approvals | No | |
| Limiting Speed | 5000rpm | |
| Bearing Material | Steel | |
| Cone Width | 36mm | |
| Number of Rows | 1 | |
| Cup Width | 29.5mm | |
| Static Load Rating | 304kN | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Outside Diameter 125mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 182kN | ||
Standards/Approvals No | ||
Limiting Speed 5000rpm | ||
Bearing Material Steel | ||
Cone Width 36mm | ||
Number of Rows 1 | ||
Cup Width 29.5mm | ||
Static Load Rating 304kN | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 33016 Taper Roller 80 mm ID Roller Bearing, 125 mm OD
- RS PRO 33016 Taper 80 mm ID Roller Bearing, 125 mm OD
- SKF 32016 X Taper 80 mm ID Roller Bearing, 125 mm OD
- SKF 30307 Taper Roller 35 mm ID Roller Bearing, 80 mm OD
- SKF 33214 Taper 70 mm ID Roller Bearing, 125 mm OD
- SKF 33116 Taper 80 mm ID Roller Bearing, 130 mm OD
- SKF 33109 Taper 45 mm ID Roller Bearing, 80 mm OD
- SKF 33216 Taper 80 mm ID Roller Bearing, 140 mm OD