SKF 32320 Taper 100 mm ID Roller Bearing, 215 mm OD
- N° de stock RS:
- 208-0076
- Référence fabricant:
- 32320
- Fabricant:
- SKF
Sous-total (1 unité)*
1 365,62 €
(TVA exclue)
1 652,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 08 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 365,62 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0076
- Référence fabricant:
- 32320
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 100mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Limiting Speed | 3200rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 617kN | |
| End Type | Open | |
| Cone Width | 77.5mm | |
| Static Load Rating | 780kN | |
| Outside Diameter | 215mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 100mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Limiting Speed 3200rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 617kN | ||
End Type Open | ||
Cone Width 77.5mm | ||
Static Load Rating 780kN | ||
Outside Diameter 215mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
SKF Taper Roller Bearing, 100 mm ID, 215 mm OD - 32320
If you need reliable bearings that can accommodate simultaneous axial and radial loads, give these taper roller bearings from SKF a go. Their surface finish encourages lubricant film formation for smooth motion, and they produce minimal friction and low noise to reduce disturbances in your environment. This also means they offer a long service life and remove the need for frequent maintenance or replacement. Thanks to their separable and interchangeable parts, they're simple to mount, dismount and inspect when you're carrying out routine checks.
• Parallel bore type
• Compact structure
• Low maintenance, noise and vibration
• Inside diameter of 100 mm
• Outside diameter of 215 mm
• Race width of 77.5 mm
• Basic dynamic load rating of 617 kN
Application Information
• Automotive industry
• Agricultural machinery
• Construction and mining industries
Do these bearings require lubrication?
Yes, SKF roller bearings must be adequately lubricated to operate reliably. The lubricant is required to reduce friction, prevent wear and protect the bearing surfaces from corrosion and excess heat. Grease is generally suitable, though oil may be needed for some applications.
Liens connexes
- FAG 32320-A Taper Roller 100 mm ID Tapered Roller Bearing, 215 mm OD
- SKF 30224 Taper 120 mm ID Roller Bearing, 215 mm OD
- SKF 30320 Taper Roller 100 mm ID Tapered Roller Bearing, 215 mm OD
- SKF C 2320 K Taper 100 mm ID Roller Bearing, 215 mm OD
- SKF C 3224 K Taper 120 mm ID Roller Bearing, 215 mm OD
- SKF 21320 E Taper 100 mm ID Roller Bearing, 215 mm OD
- SKF 32224/DF Taper Roller 120 mm ID Tapered Roller Bearing, 215 mm OD
- NTN 30320U Taper Roller 100 mm ID Roller Bearing, 215 mm OD