SKF 32314 Taper 70 mm ID Roller Bearing, 150 mm OD
- N° de stock RS:
- 208-0069
- Référence fabricant:
- 32314
- Fabricant:
- SKF
Sous-total (1 unité)*
244,65 €
(TVA exclue)
296,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 06 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 244,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0069
- Référence fabricant:
- 32314
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 70mm | |
| Bore Type | Parallel | |
| Bearing Dynamic Load Rating | 363kN | |
| End Type | Shielded | |
| Outside Diameter | 150mm | |
| Limiting Speed | 4500rpm | |
| Cone Width | 54mm | |
| Static Load Rating | 380kN | |
| Cup Width | 42mm | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 70mm | ||
Bore Type Parallel | ||
Bearing Dynamic Load Rating 363kN | ||
End Type Shielded | ||
Outside Diameter 150mm | ||
Limiting Speed 4500rpm | ||
Cone Width 54mm | ||
Static Load Rating 380kN | ||
Cup Width 42mm | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 32314-BA Taper Roller 70 mm ID Tapered Roller Bearing, 150 mm OD
- FAG 32314-A Taper Roller 70 mm ID Tapered Roller Bearing, 150 mm OD
- SKF 30314 Taper 70 mm ID Roller Bearing, 150 mm OD
- SKF 31314/CL7A Taper 70 mm ID Roller Bearing, 150 mm OD
- SKF 22314 E/VA405 Taper 70 mm ID Roller Bearing, 150 mm OD
- NTN 30314U Taper Roller 70 mm ID Roller Bearing, 150 mm OD
- NTN 32314U Taper Roller 70 mm ID Roller Bearing, 150 mm OD
- SKF T4DB 150 Taper 150 mm ID Roller Bearing, 210 mm OD