SKF 32312 Taper 60 mm ID Roller Bearing, 130 mm OD
- N° de stock RS:
- 208-0065
- Référence fabricant:
- 32312
- Fabricant:
- SKF
Sous-total (1 unité)*
117,86 €
(TVA exclue)
142,61 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 04 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 117,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0065
- Référence fabricant:
- 32312
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Parallel | |
| Number of Rows | 1 | |
| Cup Width | 37mm | |
| Static Load Rating | 290kN | |
| Outside Diameter | 130mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 282kN | |
| Standards/Approvals | No | |
| Limiting Speed | 5300rpm | |
| Cone Width | 48.5mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Parallel | ||
Number of Rows 1 | ||
Cup Width 37mm | ||
Static Load Rating 290kN | ||
Outside Diameter 130mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 282kN | ||
Standards/Approvals No | ||
Limiting Speed 5300rpm | ||
Cone Width 48.5mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- SKF 32312 BJ2/QCL7C Taper 60 mm ID Roller Bearing, 130 mm OD
- FAG 32312-A Taper Roller 60 mm ID Tapered Roller Bearing, 130 mm OD
- NTN 4T-32312 Tapered Roller 60 mm ID Tapered Roller Bearing, 130 mm OD
- SKF 31312 Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 31312 J2/QDF Taper 60 mm ID Roller Bearing, 130 mm OD
- NTN 30312U Taper Roller 60 mm ID Roller Bearing, 130 mm OD
- NTN 32312U Taper Roller 60 mm ID Roller Bearing, 130 mm OD
- SKF 33116 Taper 80 mm ID Roller Bearing, 130 mm OD