SKF 32309 Taper 45 mm ID Roller Bearing, 100 mm OD
- N° de stock RS:
- 208-0062
- Référence fabricant:
- 32309
- Fabricant:
- SKF
Sous-total (1 unité)*
64,77 €
(TVA exclue)
78,37 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 64,77 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0062
- Référence fabricant:
- 32309
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Cage Material | Pressed Steel | |
| Number of Rows | 1 | |
| Bearing Dynamic Load Rating | 145kN | |
| Cone Width | 38.25mm | |
| Bearing Material | Steel | |
| Limiting Speed | 7000rpm | |
| Standards/Approvals | No | |
| End Type | Shielded | |
| Outside Diameter | 100mm | |
| Cup Width | 30mm | |
| Static Load Rating | 185kN | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Cage Material Pressed Steel | ||
Number of Rows 1 | ||
Bearing Dynamic Load Rating 145kN | ||
Cone Width 38.25mm | ||
Bearing Material Steel | ||
Limiting Speed 7000rpm | ||
Standards/Approvals No | ||
End Type Shielded | ||
Outside Diameter 100mm | ||
Cup Width 30mm | ||
Static Load Rating 185kN | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- FAG 32309-A Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- RS PRO 32309 Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF 33109 Taper 45 mm ID Roller Bearing, 80 mm OD
- SKF 32209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF 30209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF C 2209 KTN9 Taper Roller 45 mm ID Roller Bearing, 85 mm OD
- SKF T2ED 045 Taper Roller 45 mm ID Roller Bearing, 95 mm OD