SKF 32305 Taper 25 mm ID Roller Bearing, 62 mm OD
- N° de stock RS:
- 208-0057
- Référence fabricant:
- 32305
- Fabricant:
- SKF
Sous-total (1 unité)*
36,74 €
(TVA exclue)
44,46 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 36,74 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0057
- Référence fabricant:
- 32305
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Outside Diameter | 62mm | |
| Static Load Rating | 63kN | |
| Cup Width | 20mm | |
| Number of Rows | 1 | |
| Cone Width | 25.25mm | |
| Bearing Dynamic Load Rating | 74.1kN | |
| Limiting Speed | 12000rpm | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Outside Diameter 62mm | ||
Static Load Rating 63kN | ||
Cup Width 20mm | ||
Number of Rows 1 | ||
Cone Width 25.25mm | ||
Bearing Dynamic Load Rating 74.1kN | ||
Limiting Speed 12000rpm | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- NTN 4T-32305 Taper Roller 25 mm ID Taper Roller Bearing, 62 mm OD
- FAG 32305-A Taper Roller 25 mm ID Roller Bearing, 62 mm OD
- SKF 31305 Taper 25 mm ID Roller Bearing, 62 mm OD
- SKF 30305 Taper 25 mm ID Roller Bearing, 62 mm OD
- NTN 4T-30305 Taper Roller 25 mm ID Taper Roller Bearing, 62 mm OD
- NTN 4T-30305D Taper Roller 25 mm ID Taper Roller Bearing, 62 mm OD
- SKF 32206 Taper 30 mm ID Roller Bearing, 62 mm OD
- SKF 33206 Taper 30 mm ID Roller Bearing, 62 mm OD