SKF 32028 X Taper 140 mm ID Roller Bearing, 210 mm OD
- N° de stock RS:
- 208-0033
- Référence fabricant:
- 32028 X
- Fabricant:
- SKF
Sous-total (1 unité)*
440,54 €
(TVA exclue)
533,05 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 10 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 440,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0033
- Référence fabricant:
- 32028 X
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 140mm | |
| Bore Type | Parallel | |
| Bearing Dynamic Load Rating | 404kN | |
| Standards/Approvals | No | |
| Cup Width | 34mm | |
| Limiting Speed | 2800rpm | |
| Number of Rows | 1 | |
| Cone Width | 45mm | |
| Static Load Rating | 585kN | |
| End Type | Shielded | |
| Outside Diameter | 210mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 140mm | ||
Bore Type Parallel | ||
Bearing Dynamic Load Rating 404kN | ||
Standards/Approvals No | ||
Cup Width 34mm | ||
Limiting Speed 2800rpm | ||
Number of Rows 1 | ||
Cone Width 45mm | ||
Static Load Rating 585kN | ||
End Type Shielded | ||
Outside Diameter 210mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- RS PRO 32028-X Taper 140 mm ID Roller Bearing, 210 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD
- SKF 33018 Taper 90 mm ID Roller Bearing, 140 mm OD
- SKF 33216 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF 32313 Taper 65 mm ID Roller Bearing, 140 mm OD
- SKF 30313 Taper 65 mm ID Roller Bearing, 140 mm OD
- SKF 30228 Taper 140 mm ID Roller Bearing, 250 mm OD
- SKF 30216 Taper 80 mm ID Roller Bearing, 140 mm OD