SKF 32019 X Taper 95 mm ID Roller Bearing, 145 mm OD
- N° de stock RS:
- 208-0028
- Référence fabricant:
- 32019 X
- Fabricant:
- SKF
Sous-total (1 unité)*
128,10 €
(TVA exclue)
155,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 10 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 128,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0028
- Référence fabricant:
- 32019 X
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 95mm | |
| Bore Type | Parallel | |
| Static Load Rating | 270kN | |
| Cup Width | 24mm | |
| Bearing Dynamic Load Rating | 206kN | |
| Cone Width | 32mm | |
| Number of Rows | 1 | |
| End Type | Shielded | |
| Outside Diameter | 145mm | |
| Limiting Speed | 4300rpm | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 95mm | ||
Bore Type Parallel | ||
Static Load Rating 270kN | ||
Cup Width 24mm | ||
Bearing Dynamic Load Rating 206kN | ||
Cone Width 32mm | ||
Number of Rows 1 | ||
End Type Shielded | ||
Outside Diameter 145mm | ||
Limiting Speed 4300rpm | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- RS PRO 32019-X Taper 95 mm ID Roller Bearing, 145 mm OD
- SNR 32019A Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- NTN 32019XU Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- FAG 33019 Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- NTN 4T-33019 Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- SKF T4CB 100 Taper Roller 100 mm ID Roller Bearing, 145 mm OD
- SKF 32219 Taper 95 mm ID Roller Bearing, 170 mm OD
- SKF 30219 Taper Roller 95 mm ID Tapered Roller Bearing, 170 mm OD