SKF 32018 X Taper 90 mm ID Roller Bearing, 140 mm OD
- N° de stock RS:
- 208-0027
- Référence fabricant:
- 32018 X
- Fabricant:
- SKF
Sous-total (1 unité)*
112,13 €
(TVA exclue)
135,68 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 112,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0027
- Référence fabricant:
- 32018 X
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 90mm | |
| Bore Type | Cylindrical | |
| Cage Material | Sheet Metal | |
| End Type | Shielded | |
| Static Load Rating | 270kN | |
| Cone Width | 32mm | |
| Cup Width | 24mm | |
| Bearing Dynamic Load Rating | 208kN | |
| Standards/Approvals | No | |
| Number of Rows | 1 | |
| Limiting Speed | 4300rpm | |
| Outside Diameter | 140mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 90mm | ||
Bore Type Cylindrical | ||
Cage Material Sheet Metal | ||
End Type Shielded | ||
Static Load Rating 270kN | ||
Cone Width 32mm | ||
Cup Width 24mm | ||
Bearing Dynamic Load Rating 208kN | ||
Standards/Approvals No | ||
Number of Rows 1 | ||
Limiting Speed 4300rpm | ||
Outside Diameter 140mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
SKF Roller Bearing, 90mm Inside Diameter, 140mm Outside Diameter - 32018 X
This roller bearing is designed to support rotational assemblies where axial and radial load coordination is required. It operates as a single-row tapered bearing with protective end shields, suited for installations needing controlled contamination resistance and dependable bearing alignment under combined loads.
Features and Benefits:
• Limiting speed 4300 r/min enables higher-speed operation
• Static load capacity 270 kN resists heavy standstill loads
• Dynamic load rating 208 kN sustains sustained operational forces
• Sheet-metal cage provides structural retention and spacing
• Shielded end type reduces ingress of debris and contaminants
• Cylindrical bore simplifies mounting on standard shafts
• Static load capacity 270 kN resists heavy standstill loads
• Dynamic load rating 208 kN sustains sustained operational forces
• Sheet-metal cage provides structural retention and spacing
• Shielded end type reduces ingress of debris and contaminants
• Cylindrical bore simplifies mounting on standard shafts
Applications
• Suitable for transmissions requiring tapered contact support
• Ideal for heavy stationary supports with high preload requirements
• Used with rotating assemblies where shaft fitting is cylindrical
• Can be used for machinery needing Compact cup-and-cone arrangement
• Suitable for drives operating at elevated rotational speeds
• Ideal for heavy stationary supports with high preload requirements
• Used with rotating assemblies where shaft fitting is cylindrical
• Can be used for machinery needing Compact cup-and-cone arrangement
• Suitable for drives operating at elevated rotational speeds
What are the axial and radial load capabilities at rest?
The bearing’s static load rating of 270 kN indicates its resistance to high loads when stationary.
How does the bearing manage continuous operational loads?
A dynamic load rating of 208 kN defines the bearing’s capacity to carry cyclic and running forces during service.
What shaft Interface is required for installation?
The component uses a cylindrical bore, so a straight shaft journal is required for correct fitting.
How do the end shields affect maintenance intervals?
Shields limit contaminant ingress, which can reduce cleaning frequency and help preserve lubricant condition between services.
What features support higher rotational speeds?
The bearing is specified for operation up to 4300 r/min and includes a sheet-metal cage to maintain roller spacing at speed.
Liens connexes
- RS PRO 32018-X Taper 90 mm ID Roller Bearing, 140 mm OD
- SKF 33018 Taper 90 mm ID Roller Bearing, 140 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD
- NTN 33018U Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- NTN 32018XU Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- FAG 33018 Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- SNR 32018A Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- SKF 30216 Taper 80 mm ID Roller Bearing, 140 mm OD