SKF 32012 X/CL7C Taper 60 mm ID Roller Bearing, 95 mm OD
- N° de stock RS:
- 208-0021
- Référence fabricant:
- 32012 X/CL7C
- Fabricant:
- SKF
Sous-total (1 unité)*
53,25 €
(TVA exclue)
64,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 53,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0021
- Référence fabricant:
- 32012 X/CL7C
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Parallel | |
| Limiting Speed | 6700rpm | |
| Series | 32012 X SKF Explorer | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 101kN | |
| End Type | Shielded | |
| Outside Diameter | 95mm | |
| Static Load Rating | 122kN | |
| Cup Width | 17.5mm | |
| Number of Rows | 1 | |
| Cone Width | 23mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Parallel | ||
Limiting Speed 6700rpm | ||
Series 32012 X SKF Explorer | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 101kN | ||
End Type Shielded | ||
Outside Diameter 95mm | ||
Static Load Rating 122kN | ||
Cup Width 17.5mm | ||
Number of Rows 1 | ||
Cone Width 23mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- SKF 32012 X Taper Roller 60 mm ID Tapered Roller Bearing, 95 mm OD
- NTN 4T-32012X Taper Roller 60 mm ID Roller Bearing, 95 mm OD
- Timken 32012X Taper 60 mm ID Metric Roller Bearing, 95 mm OD
- RS PRO 32012-X Taper 60 mm ID Roller Bearing, 95 mm OD
- SKF 31310/CL7C Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF T7FC 065/CL7C Taper Roller 65 mm ID Roller Bearing, 130 mm OD
- SKF T7FC 055/CL7C Taper Roller 55 mm ID Roller Bearing, 115 mm OD
- SKF HM 803146/2/110/2/CL7C Taper 41.28 mm ID Imperial Roller Bearing, 88.9 mm OD