SKF 30221 Taper 105 mm ID Roller Bearing, 190 mm OD
- N° de stock RS:
- 207-9988
- Référence fabricant:
- 30221
- Fabricant:
- SKF
Sous-total (1 unité)*
278,49 €
(TVA exclue)
336,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 07 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 278,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-9988
- Référence fabricant:
- 30221
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 105mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Standards/Approvals | No | |
| Limiting Speed | 3400rpm | |
| Bearing Dynamic Load Rating | 282kN | |
| End Type | Shielded | |
| Outside Diameter | 190mm | |
| Cup Width | 30mm | |
| Static Load Rating | 368kN | |
| Number of Rows | 1 | |
| Cone Width | 40mm | |
| Bearing Material | Steel | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 105mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Standards/Approvals No | ||
Limiting Speed 3400rpm | ||
Bearing Dynamic Load Rating 282kN | ||
End Type Shielded | ||
Outside Diameter 190mm | ||
Cup Width 30mm | ||
Static Load Rating 368kN | ||
Number of Rows 1 | ||
Cone Width 40mm | ||
Bearing Material Steel | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 30221-A Taper Roller 105 mm ID Roller Bearing, 190 mm OD
- RS PRO 30221 Taper 105 mm ID Roller Bearing, 190 mm OD
- SKF 32221 Taper 105 mm ID Roller Bearing, 190 mm OD
- NTN 32221U Taper Roller 105 mm ID Roller Bearing, 190 mm OD
- SKF 32938 Taper 190 mm ID Roller Bearing, 260 mm OD
- SKF 32318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 31318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 30318 Taper 90 mm ID Roller Bearing, 190 mm OD