INA NK80/35-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- N° de stock RS:
- 194-7369
- Référence fabricant:
- NK80/35-XL
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
143,43 €
(TVA exclue)
173,55 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 143,43 € |
| 5 - 9 | 137,69 € |
| 10 - 24 | 134,82 € |
| 25 + | 131,94 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-7369
- Référence fabricant:
- NK80/35-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 95mm | |
| Race Width | 35mm | |
| Bore Type | Parallel | |
| Static Load Rating | 184kN | |
| Standards/Approvals | No | |
| Outside Diameter | 95mm | |
| End Type | Open | |
| Dynamic Load Rating | 89kN | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 95mm | ||
Race Width 35mm | ||
Bore Type Parallel | ||
Static Load Rating 184kN | ||
Standards/Approvals No | ||
Outside Diameter 95mm | ||
End Type Open | ||
Dynamic Load Rating 89kN | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- INA NK80/25-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- NTN NK80/25R+1R70X80X25 70 mm ID Needle Roller Bearing Needle Roller, 95 mm OD
- INA NK95/36-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- INA NK95/26-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- NTN NK80/25R 80 mm ID Needle Roller Bearing Machined-ring 95 mm OD
- NTN NK80/35R 80 mm ID Needle Roller Bearing Machined-ring 95 mm OD
- INA NKS35-XL 35 mm ID Needle Roller Bearing Needle Roller, 50 mm OD
- NTN NK80/35R+1R70X80X35 70 mm ID Needle Roller Bearing Needle Roller 95 mm OD