INA NK47/30-XL 57 mm ID Roller Bearing Needle, 57 mm OD
- N° de stock RS:
- 194-7358
- Référence fabricant:
- NK47/30-XL
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
55,70 €
(TVA exclue)
67,40 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 - 4 | 55,70 € |
| 5 - 9 | 53,49 € |
| 10 - 24 | 52,35 € |
| 25 + | 51,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-7358
- Référence fabricant:
- NK47/30-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 57mm | |
| Race Width | 30mm | |
| Bore Type | Parallel | |
| End Type | Open | |
| Dynamic Load Rating | 48.5kN | |
| Outside Diameter | 57mm | |
| Static Load Rating | 94kN | |
| Standards/Approvals | No | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 57mm | ||
Race Width 30mm | ||
Bore Type Parallel | ||
End Type Open | ||
Dynamic Load Rating 48.5kN | ||
Outside Diameter 57mm | ||
Static Load Rating 94kN | ||
Standards/Approvals No | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- INA NK47/20-XL 57 mm ID Roller Bearing Needle, 57 mm OD
- NTN NK47/20RCT 47 mm ID Needle Roller Bearing Needle Roller, 57 mm OD
- NTN NK47/20RCT+1R42X47X20 42 mm ID Needle Roller Bearing Needle Roller, 57 mm OD
- NTN NK47/30R 47 mm ID Needle Roller Bearing Needle Roller 57 mm OD
- NTN NK47/30R+1R42X47X30 42 mm ID Needle Roller Bearing Needle Roller 57 mm OD
- INA NK110/30-XL 110 mm ID Needle Roller Bearing Needle Roller, 130 mm OD
- INA NKXR30-XL 30 mm ID Needle Roller Bearing Axial Cylindrical Roller 42 mm OD
- INA NA6903-XL 17 mm ID Roller Bearing Needle, 30 mm OD