INA NK37/20-XL 47 mm ID Roller Bearing Needle, 47 mm OD
- N° de stock RS:
- 194-7351
- Référence fabricant:
- NK37/20-XL
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
34,70 €
(TVA exclue)
41,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 34,70 € |
| 5 - 9 | 33,29 € |
| 10 - 24 | 32,60 € |
| 25 + | 31,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-7351
- Référence fabricant:
- NK37/20-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 47mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Static Load Rating | 43.5kN | |
| Dynamic Load Rating | 28kN | |
| Standards/Approvals | No | |
| End Type | Open | |
| Outside Diameter | 47mm | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 47mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Static Load Rating 43.5kN | ||
Dynamic Load Rating 28kN | ||
Standards/Approvals No | ||
End Type Open | ||
Outside Diameter 47mm | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- INA NK37/30-XL 47 mm ID Roller Bearing Needle, 47 mm OD
- NTN NK37/20R+1R32X37X20 32 mm ID Needle Roller Bearing Needle Roller, 47 mm OD
- INA RPNA30/47-XL 30 mm ID Roller Bearing Needle, 47 mm OD
- NTN NK37/20R 37 mm ID Needle Roller Bearing Machined-ring 47 mm OD
- NTN NK37/30R 37 mm ID Needle Roller Bearing Needle Roller 47 mm OD
- INA NKXR35-XL 35 mm ID Needle Roller Bearing Axial Cylindrical Roller 47 mm OD
- INA NA6906-XL 30 mm ID Roller Bearing Needle, 47 mm OD
- INA NA4906-XL 30 mm ID Roller Bearing Needle, 47 mm OD