Better World
INA N208-E-XL-TVP2-C3 40 mm ID Roller Bearing, 80 mm OD
- N° de stock RS:
- 194-7261
- Référence fabricant:
- N208-E-XL-TVP2-C3
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
110,82 €
(TVA exclue)
134,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 110,82 € |
| 5 - 9 | 106,37 € |
| 10 - 24 | 104,16 € |
| 25 + | 101,94 € |
*Prix donné à titre indicatif
Better World
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.
- N° de stock RS:
- 194-7261
- Référence fabricant:
- N208-E-XL-TVP2-C3
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 18mm | |
| Bore Type | Parallel | |
| Static Load Rating | 53kN | |
| Better World Product | Yes | |
| Outside Diameter | 80mm | |
| End Type | Open | |
| Standards/Approvals | No | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Dynamic Load Rating | 63kN | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 18mm | ||
Bore Type Parallel | ||
Static Load Rating 53kN | ||
Better World Product Yes | ||
Outside Diameter 80mm | ||
End Type Open | ||
Standards/Approvals No | ||
Better World Claim Extended Product Life, Saves Energy | ||
Dynamic Load Rating 63kN | ||
Single row cylindrical roller bearings with cage are suitable where:
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Liens connexes
- INA N208-E-XL-TVP2 40 mm ID Roller Bearing, 80 mm OD
- INA N206-E-XL-TVP2-C3 30 mm ID Roller Bearing, 62 mm OD
- INA N207-E-XL-TVP2-C3 35 mm ID Roller Bearing, 72 mm OD
- INA N210-E-XL-TVP2-C3 50 mm ID Roller Bearing, 90 mm OD
- INA N209-E-XL-TVP2-C3 45 mm ID Roller Bearing, 85 mm OD
- INA N204-E-XL-TVP2-C3 20 mm ID Roller Bearing, 47 mm OD
- INA N205-E-XL-TVP2-C3 25 mm ID Roller Bearing, 52 mm OD
- INA NJ307-E-XL-TVP2 35 mm ID Roller Bearing, 80 mm OD