INA HK4516-A-HLA 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- N° de stock RS:
- 194-6948
- Référence fabricant:
- HK4516-A-HLA
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
16,37 €
(TVA exclue)
19,81 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 19 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 16,37 € |
| 5 - 9 | 15,37 € |
| 10 - 24 | 15,10 € |
| 25 + | 14,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-6948
- Référence fabricant:
- HK4516-A-HLA
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45mm | |
| Race Width | 16mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Static Load Rating | 43kN | |
| End Type | Open | |
| Dynamic Load Rating | 21.3kN | |
| Standards/Approvals | No | |
| Outside Diameter | 52mm | |
| Bearing Type | Drawn Cup Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 45mm | ||
Race Width 16mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Static Load Rating 43kN | ||
End Type Open | ||
Dynamic Load Rating 21.3kN | ||
Standards/Approvals No | ||
Outside Diameter 52mm | ||
Bearing Type Drawn Cup Needle | ||
Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- NTN HK4516 45 mm ID Needle Roller Thrust Bearing Needle Roller 52 mm OD
- INA HK5520-HLA 55 mm ID Roller Bearing Drawn Cup Needle, 63 mm OD
- INA HK4512-B 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA HK4520-B 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA HK4518-RS-A-L271 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA HK4520-2RS-A-L271 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- NTN HK4520 45 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 52 mm OD
- NTN HK4520D 45 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 52 mm OD