Timken 32006X Taper 30 mm ID Metric Roller Bearing, 55 mm OD
- N° de stock RS:
- 193-1010
- Référence fabricant:
- 32006X
- Fabricant:
- Timken
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
24,82 €
(TVA exclue)
30,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 19 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 24,82 € |
| 5 - 9 | 23,36 € |
| 10 - 24 | 22,86 € |
| 25 + | 22,42 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1010
- Référence fabricant:
- 32006X
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 30mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Bearing Material | Steel | |
| Cup Width | 13mm | |
| Number of Rows | 1 | |
| Outside Diameter | 55mm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 46.5kN | |
| End Type | Open | |
| Cone Width | 17mm | |
| Static Load Rating | 45.3kN | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 30mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Bearing Material Steel | ||
Cup Width 13mm | ||
Number of Rows 1 | ||
Outside Diameter 55mm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 46.5kN | ||
End Type Open | ||
Cone Width 17mm | ||
Static Load Rating 45.3kN | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- RS PRO 32006 Taper 30 mm ID Metric Roller Bearing, 55 mm OD
- SKF 32006 X Taper 30 mm ID Roller Bearing, 55 mm OD
- FAG 32006-X-XL Taper 30 mm ID Roller Bearing, 55 mm OD
- NTN 4T-32006X Taper Roller 30 mm ID Needle Roller Thrust Bearing, 55 mm OD
- Timken 33211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 30211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32011X Taper 55 mm ID Metric Roller Bearing, 90 mm OD