Timken 30310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- N° de stock RS:
- 193-1007
- Référence fabricant:
- 30310
- Fabricant:
- Timken
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
70,88 €
(TVA exclue)
85,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 70,88 € |
| 5 - 9 | 66,68 € |
| 10 - 24 | 65,28 € |
| 25 + | 63,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1007
- Référence fabricant:
- 30310
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Tapered | |
| Number of Rows | 1 | |
| Outside Diameter | 110mm | |
| Cone Width | 29.25mm | |
| Bearing Dynamic Load Rating | 168kN | |
| Standards/Approvals | No | |
| Cup Width | 23mm | |
| Limiting Speed | 6300rpm | |
| Static Load Rating | 150kN | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Tapered | ||
Number of Rows 1 | ||
Outside Diameter 110mm | ||
Cone Width 29.25mm | ||
Bearing Dynamic Load Rating 168kN | ||
Standards/Approvals No | ||
Cup Width 23mm | ||
Limiting Speed 6300rpm | ||
Static Load Rating 150kN | ||
End Type Shielded | ||
Bearing Type Taper | ||
- Pays d'origine :
- FR
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- Timken 32310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- NTN 4T-30310 Taper Roller 50 mm ID Roller Bearing, 110 mm OD
- Timken 32212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- Timken 30212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- Timken 32014X Taper 70 mm ID Metric Roller Bearing, 110 mm OD
- FAG 30310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD