Timken 30302 Taper 15 mm ID Metric Roller Bearing, 42 mm OD
- N° de stock RS:
- 193-0999
- Référence fabricant:
- 30302
- Fabricant:
- Timken
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
22,28 €
(TVA exclue)
26,96 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 22,28 € |
| 5 - 9 | 20,98 € |
| 10 - 24 | 20,55 € |
| 25 + | 20,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-0999
- Référence fabricant:
- 30302
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 15mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cup Width | 11mm | |
| Static Load Rating | 22.2kN | |
| Outside Diameter | 42mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 26kN | |
| Standards/Approvals | No | |
| Bearing Material | Steel | |
| Cone Width | 14.25mm | |
| Number of Rows | 1 | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 15mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cup Width 11mm | ||
Static Load Rating 22.2kN | ||
Outside Diameter 42mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 26kN | ||
Standards/Approvals No | ||
Bearing Material Steel | ||
Cone Width 14.25mm | ||
Number of Rows 1 | ||
Bearing Type Taper | ||
- Pays d'origine :
- FR
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- RS PRO 30302- Taper 15 mm ID Metric Roller Bearing, 42 mm OD
- SKF 30302 J2 Taper 15 mm ID Roller Bearing, 42 mm OD
- FAG 30302-A Taper 15 mm ID Roller Bearing, 42 mm OD
- NTN 4T-30302 Taper Roller 15 mm ID Needle Roller Thrust Bearing, 42 mm OD
- Timken 32004X Taper 20 mm ID Metric Roller Bearing, 42 mm OD
- Timken 30213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- Timken 32015X Taper 75 mm ID Metric Roller Bearing, 115 mm OD
- Timken 30211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD