Timken 30213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- N° de stock RS:
- 193-0998
- Référence fabricant:
- 30213
- Fabricant:
- Timken
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
76,52 €
(TVA exclue)
92,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 76,52 € |
| 5 - 9 | 72,01 € |
| 10 - 24 | 70,55 € |
| 25 + | 69,01 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-0998
- Référence fabricant:
- 30213
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 65mm | |
| Bore Type | Tapered | |
| Number of Rows | 1 | |
| Cup Width | 20mm | |
| Cone Width | 24.75mm | |
| Static Load Rating | 158kN | |
| Outside Diameter | 120mm | |
| Bearing Dynamic Load Rating | 164kN | |
| Standards/Approvals | No | |
| Limiting Speed | 5600rpm | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 65mm | ||
Bore Type Tapered | ||
Number of Rows 1 | ||
Cup Width 20mm | ||
Cone Width 24.75mm | ||
Static Load Rating 158kN | ||
Outside Diameter 120mm | ||
Bearing Dynamic Load Rating 164kN | ||
Standards/Approvals No | ||
Limiting Speed 5600rpm | ||
End Type Shielded | ||
Bearing Type Taper | ||
- Pays d'origine :
- CN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions