INA SL192305 25 mm ID Roller Bearing, 62 mm OD
- N° de stock RS:
- 191-4505
- Référence fabricant:
- SL192305
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
325,97 €
(TVA exclue)
394,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 05 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 325,97 € |
| 5 - 9 | 312,90 € |
| 10 - 24 | 306,37 € |
| 25 + | 299,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-4505
- Référence fabricant:
- SL192305
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 24mm | |
| Bore Type | Parallel | |
| Outside Diameter | 62mm | |
| Static Load Rating | 59kN | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 73kN | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 24mm | ||
Bore Type Parallel | ||
Outside Diameter 62mm | ||
Static Load Rating 59kN | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 73kN | ||
Bearing arrangements are subjected to particularly high radial loads
Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)
Bearing arrangements operating under the conditions described above must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage
Particularly space-saving designs are required despite very high load
The bearings should be separable (not self-retaining) for easier mounting
Liens connexes
- INA NJ305-E-XL-TVP2 25 mm ID Roller Bearing, 62 mm OD
- INA NK50/25-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- INA NKI45/25-TV-XL 45 mm ID Roller Bearing Needle, 62 mm OD
- INA PNA40/62-XL 40 mm ID Roller Bearing Aligning Needle Roller, 62 mm OD
- INA SL045007-PP 35 mm ID Roller Bearing, 62 mm OD
- INA 81207-TV 35 mm ID Roller Bearing, 62 mm OD
- INA SL185007-A 35 mm ID Roller Bearing, 62 mm OD
- INA NKIB5908-XL 40 mm ID Roller Bearing Needle, 62 mm OD