RS Better World
INA SL183011-A-XL 55 mm ID Roller Bearing, 90 mm OD
- N° de stock RS:
- 191-4490
- Référence fabricant:
- SL183011-A-XL
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
201,12 €
(TVA exclue)
243,36 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 29 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 201,12 € |
| 5 - 9 | 193,09 € |
| 10 - 24 | 189,04 € |
| 25 + | 185,02 € |
*Prix donné à titre indicatif
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.
En savoir plus sur les produits RS Better World
- N° de stock RS:
- 191-4490
- Référence fabricant:
- SL183011-A-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 26mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| End Type | Open | |
| Static Load Rating | 136kN | |
| Outside Diameter | 90mm | |
| Dynamic Load Rating | 120kN | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Better World Product | Yes | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 26mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
End Type Open | ||
Static Load Rating 136kN | ||
Outside Diameter 90mm | ||
Dynamic Load Rating 120kN | ||
Better World Claim Extended Product Life, Saves Energy | ||
Better World Product Yes | ||
Bearing arrangements are subjected to particularly high radial loads
Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)
Bearing arrangements operating under the conditions described above must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high load
The bearings should be separable (not self-retaining) for easier mounting
Liens connexes
- INA RPNA40/55-XL 40 mm ID Roller Bearing Needle, 55 mm OD
- INA NK73/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK73/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK90/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK90/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA RNA4913-XL 72 mm ID Roller Bearing, 90 mm OD
- INA SL045011-PP 55 mm ID Roller Bearing, 90 mm OD
- INA 81211-TV 55 mm ID Roller Bearing, 90 mm OD