INA SL045013-PP 65 mm ID Roller Bearing, 100 mm OD
- N° de stock RS:
- 191-4471
- Référence fabricant:
- SL045013-PP
- Fabricant:
- INA
Bénéficiez d'une remise sur les achats en gros
Ajoutez 5 de plus pour économiser 4%
Consulter les options de prix de grosSous-total (1 unité)*
352,58 €
(TVA exclue)
426,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 4 | 352,58 € | - |
| 5 - 9 | 338,47 € | 4% |
| 10 + | 331,40 € | 6% |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-4471
- Référence fabricant:
- SL045013-PP
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 65mm | |
| Race Width | 46mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| End Type | Sealed | |
| Outside Diameter | 100mm | |
| Static Load Rating | 215kN | |
| Dynamic Load Rating | 130kN | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 65mm | ||
Race Width 46mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
End Type Sealed | ||
Outside Diameter 100mm | ||
Static Load Rating 215kN | ||
Dynamic Load Rating 130kN | ||
Bearing arrangements are subjected to particularly high radial loads
Not only particularly high radial forces but also high axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage space-saving designs are required despite very high load
The bearings should be separable for easier mounting (bearings with non-locating bearing function)
Liens connexes
- INA SL045010-PP 50 mm ID Roller Bearing, 80 mm OD
- INA SL045014-PP 70 mm ID Roller Bearing, 110 mm OD
- INA SL045011-PP 55 mm ID Roller Bearing, 90 mm OD
- INA SL045012-PP 60 mm ID Roller Bearing, 95 mm OD
- INA SL045004-PP 20 mm ID Roller Bearing, 42 mm OD
- INA SL045005-PP 25 mm ID Roller Bearing, 47 mm OD
- INA SL045009-PP 45 mm ID Roller Bearing, 75 mm OD
- INA SL045006-PP 30 mm ID Roller Bearing, 55 mm OD