INA NK43/20-XL 43 mm ID Roller Bearing Needle, 53 mm OD
- N° de stock RS:
- 191-4411
- Référence fabricant:
- NK43/20-XL
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
40,67 €
(TVA exclue)
49,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 40,67 € |
| 5 - 9 | 39,07 € |
| 10 - 24 | 38,23 € |
| 25 + | 37,43 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-4411
- Référence fabricant:
- NK43/20-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 43mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Dynamic Load Rating | 30.5kN | |
| Outside Diameter | 53mm | |
| Standards/Approvals | No | |
| Static Load Rating | 51kN | |
| End Type | Open | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 43mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Dynamic Load Rating 30.5kN | ||
Outside Diameter 53mm | ||
Standards/Approvals No | ||
Static Load Rating 51kN | ||
End Type Open | ||
Bearing Type Needle | ||
Can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- INA NK43/30-XL 53 mm ID Roller Bearing Needle, 53 mm OD
- NTN NK43/30R 43 mm ID Needle Roller Bearing Needle Roller, 53 mm OD
- NTN NK43/20R 43 mm ID Needle Roller Bearing Machined-ring 53 mm OD
- NTN NK43/30R+1R38X43X30 38 mm ID Needle Roller Bearing Machined-ring 53 mm OD
- NTN NK43/20R+1R38X43X20 38 mm ID Needle Roller Bearing Machined-ring 53 mm OD
- INA NKS35-XL 35 mm ID Needle Roller Bearing Needle Roller, 50 mm OD
- INA NA4914-XL 70 mm ID Needle Roller Bearing Needle Roller, 100 mm OD
- INA NK110/30-XL 110 mm ID Needle Roller Bearing Needle Roller, 130 mm OD