INA NK26/16-XL 26 mm ID Roller Bearing Needle, 34 mm OD
- N° de stock RS:
- 191-4400
- Référence fabricant:
- NK26/16-XL
- Fabricant:
- INA
Sous-total (1 unité)*
28,25 €
(TVA exclue)
34,18 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 28,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-4400
- Référence fabricant:
- NK26/16-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 26mm | |
| Race Width | 16mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Outside Diameter | 34mm | |
| Static Load Rating | 23.6kN | |
| Dynamic Load Rating | 17.3kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 26mm | ||
Race Width 16mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Outside Diameter 34mm | ||
Static Load Rating 23.6kN | ||
Dynamic Load Rating 17.3kN | ||
End Type Open | ||
Standards/Approvals No | ||
Bearing Type Needle | ||
Can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Liens connexes
- INA NK26/20-XL 26 mm ID Roller Bearing Needle, 34 mm OD
- NTN NK26/16R 26 mm ID Needle Roller Thrust Bearing Needle Roller 34 mm OD
- NTN NK26/20R 26 mm ID Needle Roller Thrust Bearing Needle Roller 34 mm OD
- NTN NK26/16R+1R22X26X16 22 mm ID Needle Roller Thrust Bearing Needle Roller, 34 mm OD
- INA NK18/20-XL 26 mm ID Roller Bearing Needle, 26 mm OD
- INA NK18/16-XL 18 mm ID Roller Bearing Needle, 26 mm OD
- NTN NK26/20R+1R22X26X20 22 mm ID Roller Bearing Machined-ring 34 mm OD
- INA NX17-Z-XL 17 mm ID Roller Bearing Needle, 26 mm OD