Better World
INA NJ304-E-XL-TVP2 20 mm ID Roller Bearing, 52 mm OD
- N° de stock RS:
- 191-3907
- Référence fabricant:
- NJ304-E-XL-TVP2
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
57,04 €
(TVA exclue)
69,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 57,04 € |
| 5 - 9 | 54,76 € |
| 10 - 24 | 53,61 € |
| 25 + | 52,48 € |
*Prix donné à titre indicatif
Better World
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.
- N° de stock RS:
- 191-3907
- Référence fabricant:
- NJ304-E-XL-TVP2
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 20mm | |
| Race Width | 15mm | |
| Bore Type | Parallel | |
| Cage Material | Plastic | |
| Static Load Rating | 27kN | |
| Better World Product | Yes | |
| Outside Diameter | 52mm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 37.5kN | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 20mm | ||
Race Width 15mm | ||
Bore Type Parallel | ||
Cage Material Plastic | ||
Static Load Rating 27kN | ||
Better World Product Yes | ||
Outside Diameter 52mm | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 37.5kN | ||
Better World Claim Extended Product Life, Saves Energy | ||
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Liens connexes
- INA N205-E-XL-TVP2 25 mm ID Roller Bearing, 52 mm OD
- INA N205-E-XL-TVP2-C3 25 mm ID Roller Bearing, 52 mm OD
- INA N209-E-XL-TVP2 45 mm ID Roller Bearing, 85 mm OD
- INA N206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- INA N210-E-XL-TVP2 50 mm ID Roller Bearing, 90 mm OD
- INA N208-E-XL-TVP2 40 mm ID Roller Bearing, 80 mm OD
- INA N207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- INA N204-E-XL-TVP2 20 mm ID Roller Bearing, 47 mm OD