FAG 33014 Taper 70 mm ID Roller Bearing, 110 mm OD
- N° de stock RS:
- 190-8381
- Référence fabricant:
- 33014
- Fabricant:
- FAG
Offre groupée disponible
Sous-total (1 unité)*
111,93 €
(TVA exclue)
135,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 15 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 111,93 € |
| 5 - 9 | 107,44 € |
| 10 - 24 | 105,20 € |
| 25 + | 102,95 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-8381
- Référence fabricant:
- 33014
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 70 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Static Load Rating | 223kN | |
| Cone Width | 31mm | |
| Outside Diameter | 110 mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 136 KN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 70 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Static Load Rating 223kN | ||
Cone Width 31mm | ||
Outside Diameter 110 mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 136 KN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Liens connexes
- SKF 33014 Taper 70 mm ID Tapered Roller Bearing, 110 mm OD
- RS PRO 33014 Taper 70 mm ID Roller Bearing, 110 mm OD
- FAG JK0S070-A Taper Roller 70 mm ID Tapered Roller Bearing, 110 mm OD
- FAG 33114 Taper Roller 70 mm ID Roller Bearing, 120 mm OD
- NTN 33014U Taper Roller 70 mm ID Taper Roller Bearing, 110 mm OD
- FAG 33022 Taper Roller 110 mm ID Roller Bearing, 170 mm OD
- FAG 33212 Taper Roller 60 mm ID Roller Bearing, 110 mm OD
- FAG 33122 Taper Roller 110 mm ID Roller Bearing, 180 mm OD