INA NX30-Z-XL 30 mm ID Roller Bearing Needle, 42 mm OD
- N° de stock RS:
- 174-1363
- Référence fabricant:
- NX30-Z-XL
- Fabricant:
- INA
Sous-total (1 unité)*
100,88 €
(TVA exclue)
122,06 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 100,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-1363
- Référence fabricant:
- NX30-Z-XL
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 30mm | |
| Race Width | 30mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Limiting Speed | 4300rpm | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 25.5kN | |
| Outside Diameter | 42mm | |
| Static Load Rating | 36kN | |
| End Type | Open | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 30mm | ||
Race Width 30mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Limiting Speed 4300rpm | ||
Standards/Approvals No | ||
Dynamic Load Rating 25.5kN | ||
Outside Diameter 42mm | ||
Static Load Rating 36kN | ||
End Type Open | ||
Bearing Type Needle | ||
These series comprise radial needle roller bearings and a rolling bearing component capable of supporting axial loads. They can support high radial forces as well as axial forces in one direction, while NKIB can support axial forces from both directions, and are used as locating or semi-locating bearings
Needle roller/axial deep groove ball bearings
Lubrication
Needle roller/ axial cylindrical roller bearings
Lubrication
Needle roller/ angular contact ball bearings
For alternating axial forces
Lubrication
Operating temperature
Cages
Suffixes
Liens connexes
- INA NKXR30-Z-XL Needle 30 mm ID Roller Bearing, 42 mm OD
- INA NKX30-Z-XL 30 mm ID Roller Bearing Needle, 42 mm OD
- INA NKXR30-XL 30 mm ID Needle Roller Bearing Axial Cylindrical Roller 42 mm OD
- INA PNA20/42-XL 20 mm ID Roller Bearing Needle, 42 mm OD
- INA RPNA25/42-XL 25 mm ID Roller Bearing Needle, 42 mm OD
- INA RNA4905-XL 30 mm ID Roller Bearing Needle, 42 mm OD
- INA RNA6905-XL 30 mm ID Roller Bearing Needle, 42 mm OD
- INA NKXR20-Z-XL Needle 20 mm ID Roller Bearing, 30 mm OD