RS Better World
FAG NJ206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- N° de stock RS:
- 174-1182
- Référence fabricant:
- NJ206-E-XL-TVP2
- Fabricant:
- FAG
Visuel non contractuel
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
59,18 €
(TVA exclue)
71,61 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 24 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 59,18 € |
| 5 - 9 | 56,79 € |
| 10 - 24 | 55,61 € |
| 25 + | 54,42 € |
*Prix donné à titre indicatif
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.
Cliquez ici pour en savoir plus.
- N° de stock RS:
- 174-1182
- Référence fabricant:
- NJ206-E-XL-TVP2
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 30mm | |
| Race Width | 16mm | |
| Bore Type | Parallel | |
| Limiting Speed | 14200rpm | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 46kN | |
| Outside Diameter | 62mm | |
| Static Load Rating | 37.5kN | |
| Better World Product | Yes | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 30mm | ||
Race Width 16mm | ||
Bore Type Parallel | ||
Limiting Speed 14200rpm | ||
Better World Claim Extended Product Life, Saves Energy | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 46kN | ||
Outside Diameter 62mm | ||
Static Load Rating 37.5kN | ||
Better World Product Yes | ||
Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling. The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity. The bearings are separable and are therefore easier to fit and dismantle.
Non-locating bearings
Axial displacement
Semi-locating bearings
Bearings with L-section ring
Axial displacement
Locating bearings
Bearings with rib washer
Liens connexes
- FAG NJ206-E-XL-TVP2-C3 30 mm ID Roller Bearing, 62 mm OD
- FAG NU206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- FAG NUP206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- FAG NJ2206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- FAG NUP2206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD
- FAG NU305-E-XL-TVP2-C3 25 mm ID Cylindrical Roller Bearing, 62 mm OD
- FAG NU306-E-XL-TVP2 30 mm ID Roller Bearing, 72 mm OD
- INA N206-E-XL-TVP2 30 mm ID Roller Bearing, 62 mm OD