INA HK2538-ZW 25 mm ID Roller Bearing Needle, 32 mm OD
- N° de stock RS:
- 174-1091
- Référence fabricant:
- HK2538-ZW
- Fabricant:
- INA
Sous-total (1 unité)*
15,64 €
(TVA exclue)
18,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 21 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 15,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-1091
- Référence fabricant:
- HK2538-ZW
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 38mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Static Load Rating | 66kN | |
| Outside Diameter | 32mm | |
| Limiting Speed | 10200rpm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 34kN | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 38mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Static Load Rating 66kN | ||
Outside Diameter 32mm | ||
Limiting Speed 10200rpm | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 34kN | ||
Bearing Type Needle | ||
Schaeffler Roller Bearing, 25mm Bore, 32mm Outside Diameter - HK2538-ZW
This roller bearing is a needle-type component designed for rotary assemblies requiring Compact rolling elements and an open-end configuration. It provides guided support for shafts with a parallel bore and is suitable for applications where a slim cross-section and direct lubrication access are required.
Features and Benefits:
• 10,200r/min limiting speed for high rotational performance
• 66kN static load capacity for resistance to heavy stationary loads
• 34kN dynamic rating for sustained operational loading
• 38mm race width offering extended contact length
• Open-end construction permitting direct maintenance access
• 66kN static load capacity for resistance to heavy stationary loads
• 34kN dynamic rating for sustained operational loading
• 38mm race width offering extended contact length
• Open-end construction permitting direct maintenance access
Applications
• Suitable for transmissions requiring thin radial support
• Ideal for Compact industrial gearboxes with parallel shafts
• Used with reciprocating mechanisms needing high load capacity
• Can be used for high-speed motor shaft support
• Used for assemblies requiring bearings without Seals
• Ideal for Compact industrial gearboxes with parallel shafts
• Used with reciprocating mechanisms needing high load capacity
• Can be used for high-speed motor shaft support
• Used for assemblies requiring bearings without Seals
What bore configuration does this component use?
It employs a parallel bore suitable for shafts mounted without taper adapters.
How does the open end affect maintenance?
The open end allows easier lubrication and inspection without seal removal.
What operating speed limits should be observed?
The bearing is rated to operate up to 10,200r/min under intended conditions.
How do static and dynamic capacities differ in practice?
The 66kN static rating indicates resistance to stationary loads, while the 34kN dynamic rating reflects load capacity during rotation.
Liens connexes
- INA RNA69/32-ZW-XL 40 mm ID Roller Bearing Needle, 52 mm OD
- INA NA6914-ZW-XL 70 mm ID Needle Roller Bearing Needle Roller, 100 mm OD
- INA NA6912-ZW-XL 60 mm ID Needle Roller Bearing Needle Roller, 85 mm OD
- INA NA6916-ZW-XL 80 mm ID Needle Roller Bearing Needle Roller, 110 mm OD
- INA NA6909-ZW-XL 45 mm ID Roller Bearing Needle, 68 mm OD
- INA RNA6907-ZW-XL 42 mm ID Roller Bearing Needle, 55 mm OD
- INA RNA6910-ZW-XL 58 mm ID Roller Bearing Needle, 72 mm OD
- INA NA6910-ZW-XL 50 mm ID Roller Bearing Needle, 72 mm OD