INA HK2512-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- N° de stock RS:
- 137-1761
- Référence fabricant:
- HK2512-B
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
8,79 €
(TVA exclue)
10,64 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 55 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 8,79 € |
| 5 - 9 | 8,43 € |
| 10 - 24 | 8,30 € |
| 25 + | 8,08 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1761
- Référence fabricant:
- HK2512-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Number of Rows | 1 | |
| Maximum Speed - Grease | 6100rpm | |
| Standards/Approvals | No | |
| Maximum Speed - Oil | 10200rpm | |
| End Type | Open | |
| Static Load Rating | 15200N | |
| Outside Diameter | 32mm | |
| Dynamic Load Rating | 11000N | |
| Limiting Speed | 10200rpm | |
| Bearing Type | Drawn Cup Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Maximum Speed - Grease 6100rpm | ||
Standards/Approvals No | ||
Maximum Speed - Oil 10200rpm | ||
End Type Open | ||
Static Load Rating 15200N | ||
Outside Diameter 32mm | ||
Dynamic Load Rating 11000N | ||
Limiting Speed 10200rpm | ||
Bearing Type Drawn Cup Needle | ||
- Pays d'origine :
- DE
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
Liens connexes
- INA HK3220-B 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK2520-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK2516-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK0606-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- INA HK2820-B 28 mm ID Roller Bearing Drawn Cup Needle, 35 mm OD
- INA HK0910-B 9 mm ID Roller Bearing Drawn Cup Needle, 13 mm OD