INA HK2218-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- N° de stock RS:
- 137-1759
- Référence fabricant:
- HK2218-RS-L271
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
13,51 €
(TVA exclue)
16,35 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 30 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 13,51 € |
| 5 - 9 | 12,97 € |
| 10 - 24 | 12,71 € |
| 25 + | 12,44 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1759
- Référence fabricant:
- HK2218-RS-L271
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 22mm | |
| Race Width | 18mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Dynamic Load Rating | 13400N | |
| End Type | Sealed | |
| Standards/Approvals | No | |
| Limiting Speed | 7000rpm | |
| Maximum Speed - Grease | 7000rpm | |
| Number of Rows | 1 | |
| Static Load Rating | 22100N | |
| Outside Diameter | 28mm | |
| Bearing Type | Drawn Cup Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 22mm | ||
Race Width 18mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Dynamic Load Rating 13400N | ||
End Type Sealed | ||
Standards/Approvals No | ||
Limiting Speed 7000rpm | ||
Maximum Speed - Grease 7000rpm | ||
Number of Rows 1 | ||
Static Load Rating 22100N | ||
Outside Diameter 28mm | ||
Bearing Type Drawn Cup Needle | ||
- Pays d'origine :
- DE
Schaeffler Roller Bearing, 22mm Bore, 28mm Outside Diameter - HK2218-RS-L271
This roller bearing is a drawn cup needle design intended to support Compact shaft assemblies where axial space is limited. It functions as a sealed unit to retain lubricant and exclude contaminants while operating at elevated rotational rates up to the specified limiting speed. The parallel bore form allows straightforward installation on shafts with a matching diameter.
Features and Benefits:
• Sealed end construction prevents ingress of debris
• High limiting speed supports fast rotational applications
• Significant static capacity resists Peak standing loads
• Notable dynamic rating sustains continuous radial loading
• Parallel bore enables straightforward shaft alignment
• High limiting speed supports fast rotational applications
• Significant static capacity resists Peak standing loads
• Notable dynamic rating sustains continuous radial loading
• Parallel bore enables straightforward shaft alignment
Applications
• Suitable for Compact gearbox radial support
• Ideal for high-speed textile machine components
• Used with motor armatures in confined spaces
• Can be used for linkage pivot points requiring sealing
• Ideal for high-speed textile machine components
• Used with motor armatures in confined spaces
• Can be used for linkage pivot points requiring sealing
What is the specified maximum rotational speed for operation?
The bearing is rated to operate up to a limiting speed of 7000r/min.
How does the sealing affect maintenance intervals?
The sealed configuration retains grease and reduces contamination ingress, thereby extending re-lubrication intervals compared with open designs.
What load capacities are provided for design calculations?
Use a static load capacity of 22,100N and a dynamic load capacity of 13,400N for bearing selection.
Which shaft and housing interfacing details are required for fit?
A parallel bore acceptance requires a 22mm shaft journal and a housing prepared for a drawn cup assembly.
Is this bearing suitable for grease lubrication at high speeds?
It is compatible with grease lubrication and is rated for operation at the stated 7000r/min limiting speed.
Liens connexes
- INA HK2820-2RS-L271 28 mm ID Roller Bearing Drawn Cup Needle, 35 mm OD
- INA HK2214-RS-L271 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- INA HK2018-RS-L271 20 mm ID Roller Bearing Drawn Cup Needle, 26 mm OD
- INA HK2520-2RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA BK2518-RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK1416-2RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- INA HK3520-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- INA HK1616-2RS-L271 16 mm ID Roller Bearing Drawn Cup Needle, 22 mm OD