FAG 30207-XL Taper 35 mm ID Roller Bearing, 72 mm OD
- N° de stock RS:
- 137-1485
- Référence fabricant:
- 30207-XL
- Fabricant:
- FAG
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
30,24 €
(TVA exclue)
36,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 30,24 € |
| 5 - 9 | 29,02 € |
| 10 - 24 | 28,43 € |
| 25 + | 27,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1485
- Référence fabricant:
- 30207-XL
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 35mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Maximum Speed - Grease | 8000rpm | |
| Maximum Speed - Oil | 10700rpm | |
| Limiting Speed | 10700rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 54kN | |
| End Type | Sealed | |
| Outside Diameter | 72mm | |
| Static Load Rating | 59000N | |
| Cone Width | 18.25mm | |
| Number of Rows | 1 | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 35mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Maximum Speed - Grease 8000rpm | ||
Maximum Speed - Oil 10700rpm | ||
Limiting Speed 10700rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 54kN | ||
End Type Sealed | ||
Outside Diameter 72mm | ||
Static Load Rating 59000N | ||
Cone Width 18.25mm | ||
Number of Rows 1 | ||
Bearing Type Taper | ||
Tapered Roller Bearings
FAG by Schaeffler tapered roller bearings feature a high radial and axial load carrying capacity and a large usable speed range. They are efficient at supporting forces and ensure a precise and rigid shaft guidance system due to the large effective distance between the bearings. They are adjustable, can be dismantled, and are therefore easy to fit.
Features and Benefits
• Increase in dynamic load ratings of up to 20%;• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Operating temperature: -30 °C to +120 °C
Product Application Information
Tapered roller bearings can support axial loads from one direction and high radial loads. They are normally axially adjusted against another bearing fitted in a mirror image arrangement.
Suffixes
A - Modified internal construction;X - External dimensions matched to international standards
FAG
Liens connexes
- Timken 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- FAG 32207-XL Taper 35 mm ID Roller Bearing, 72 mm OD
- RS PRO 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- SKF 30207 J2/Q Taper 35 mm ID Roller Bearing, 72 mm OD
- NTN 4T-30207 Taper Roller 35 mm ID Needle Roller Thrust Bearing, 72 mm OD
- FAG NJ207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- FAG NU207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD
- FAG NUP207-E-XL-TVP2 35 mm ID Roller Bearing, 72 mm OD